Filter
Top Products
Using the Global Paste
M7CL Owner’s Manual
Scene memory
12
145
“Global Paste” is a function that lets you copy and paste settings of the desired channel or
parameter from the current scene to scene data in memory (multiple selections are allowed).
This is a convenient way in which changes to the current scene can be applied to multiple scenes
that have already been stored.
1
In the function access area, press the
SCENE field to access the SCENE LIST win-
dow.
2
In the lower right of the SCENE LIST win-
dow, press the GLOBAL PASTE button to
access the GLOBAL PASTE window.
In this screen you can select the copy-source channels/
parameters and specify the paste-destination scene
data.
3
Use the tabs to select the items to be cop-
ied from the following choices.
4
Select the copy-source channels and
parameters.
The display will depend on the tab you selected.
You cannot select different parameters for each chan-
nel.
Use the top panel [SEL] keys to select a channel.
● INPUT tab
Select the input channel in the upper left, and its
parameters in the lower left.
You can select the following parameters.
● OUTPUT tab
Select the output channel in the upper left, and its
parameters in the lower left.
You can select the following parameters.
Using the Global Paste
INPUT Input channels and parameters
OUTPUT Output channels and parameters
RACK RACK 1–8
PATCH/NAME Input/output patching and channel names
Using the Global Paste function
• The Global Paste function can be used only by users for whom
SCENE LIST STORE/SORT is turned on in their user level set-
tings.
NOTE
ALL
All input channel parameters (except INPUT
PATCH and INPUT NAME)
HA
Settings for the head amp assigned to the cor-
responding input channel
ATT Attenuator
EQ EQ settings
DYNA1
Dynamics 1 settings (including KEY IN
SOURCE and KEY IN FILTER)
DYNA2
Dynamics 2 settings (including KEY IN
SOURCE)
MIX ON/SEND
Send to MIX bus on/off, send level, pan, and
PRE/POST
MTRX ON/
SEND
Send to MATRIX bus on/off, send level, pan,
and PRE/POST
FADER Fader level
CH ON [ON] key on/off status
ALL
All output channel parameters (except OUT-
PUT PATCH and OUTPUT NAME)
ATT Attenuator
EQ EQ settings
DYNA1
Dynamics 1 settings (including KEY IN
SOURCE and KEY IN FILTER)
MATRIX ON
Send to MATRIX bus on/off (only for MIX and
STEREO/MONO channels)
MATRIX SEND
Send level to MATRIX bus, pan, PRE/POST
(only for MIX and STEREO/MONO channels)
FADER Fader level
CH ON [ON] key on/off status
WITH MIX
SEND
Selects whether the send level sent from input
channels to the selected MIX bus will be
included in the pasted data.
WITH MATRIX
SEND
Selects whether the send level sent from input
channels to the selected MATRIX bus will be
included in the pasted data.