Filter
Top Products
M7CL Owner’s Manual
Using a USB storage device to save/load data
220
Here’s how to convert and load the patch settings for the
internal/external HA of an M7CL setting file (.M7C) that
was saved to a USB storage device by the M7CL V3. The
original setting file remains intact. Save the converted file
as a different file, if necessary.
After conversion, the patch settings change as follows:
• Conversion between the M7CL-32/48’s INTERNAL HA
and an external HA connected to the M7CL-32/48
• Conversion between an external HA connected to the
M7CL-32/48 and M7CL-48ES
* The same HA settings will be used.
1
In the function access area, press the
SETUP button to access the SETUP screen.
2
Press the SAVE/LOAD button to access the
SAVE/LOAD popup window.
3
To select the file you want to load, press the
desired file in the file list, or turn multifunc-
tion encoder on the panel.
The highlighted line in the file list indicates the file
that is selected for operations.
Using Internal HA
Using External HA via Slot
INPUT 1–16
↔
* SLOT1 IN 1–16
INPUT 17–32
↔
* SLOT2 IN 1–16
INPUT 33–48
↔
* SLOT3 IN 1–16
ST IN 1L–4R
↔
* ST IN 1L–4R
SLOT1 IN 1–16
↔
* INPUT 1–16
SLOT2 IN 1–16
↔
* INPUT 17–32
SLOT3 IN 1–16
↔
* INPUT 33–48
TALKBACK
↔
TALKBACK
OMNI OUT 1–16
↔
SLOT1 OUT 1–16
SLOT1 OUT 1–16
↔
OMNI OUT 1–16
SLOT2 OUT 1–16
↔
SLOT2 OUT 1–16
SLOT3 OUT 1–16
↔
SLOT3 OUT 1–16
2TR DIGITAL OUT
↔
2TR DIGITAL OUT
Using External HA via Slot
M7CL-48ES
INPUT 1–16
↔
* SLOT1 IN 1–16
INPUT 17–32
↔
* SLOT2 IN 1–16
INPUT 33–48
↔
* SLOT3 IN 1–16
ST IN 1L–4R
↔
* OMNI IN 1–8
SLOT1 IN 1–16
↔
* ES IN 1–16
SLOT2 IN 1–16
↔
* ES IN 17–32
SLOT3 IN 1–16
↔
* ES IN 33–48
TALKBACK
↔
TALKBACK
OMNI OUT 1–16
↔
SLOT1 OUT 1–16
SLOT1 OUT 1–16
↔
ES OUT 1–16
SLOT2 OUT
1–8
↔
ES OUT 17–24
9–16
↔
OMNI OUT 1–8
No assign
↔
SLOT2 OUT 1–16
SLOT3 OUT 1–16
↔
SLOT3 OUT 1–16
2TR DIGITAL OUT
↔
2TR DIGITAL OUT
Converting and loading the file
content from a USB storage
device
• If you plan to convert a file that was saved by the M7CL V2.0 or
earlier, first load the file, save it using the M7CL V3.0 or later, then
convert the newly saved file.
NOTE
SAVE/LOAD button
File listSTAGE BOX DATA
CONVERSION button