Filter
Top Products
Warning/Error Messages
M7CL Owner’s Manual
289
Appendices
Message
Meaning
Scene #xxx is Empty!
No data has been stored in the scene you attempted to recall, or the data has been damaged so that
it cannot be recalled.
Scene #xxx is Protected!
You attempted to overwrite (store) a protected scene.
Scene #xxx is Read Only!
You attempted to overwrite (store) a read-only scene.
xxx Parameters Copied.
Parameter xxx was copied to the copy buffer.
xxx Parameters Initialized.
Parameter xxx was initialized.
xxx Parameters Pasted.
Parameter xxx was pasted from the copy buffer.
xxx Parameters Swapped with Copy Buffer.
Parameter xxx was exchanged with the contents of the copy buffer.
AUTO CONFIGURE is ON.
The word clock setting cannot be changed if the AUTO CONFIGURE button is turned ON.
Cannot Assign!
You attempted to assign an output channel to DCA.
Cannot Bookmark This Popup.
This popup window cannot be bookmarked.
Cannot Paste to Different Parameter Type!
Paste cannot be performed because you are attempting to paste channel settings of a different type.
Cannot Recall to Different Parameter Type!
You attempted to recall a library of a different type.
Cannot Recall!
Failed to recall a scene memory or library.
Cannot Select This Channel.
You attempted to select a channel that cannot be operated due to your user level or some other reason.
Cannot Store!
Failed to store a scene memory or library.
Cannot Undo!
You pressed the [UNDO] button when Undo was not available.
Channel Copied.
Channel settings have been copied.
Channel Initialized.
Channel settings have been initialized.
Channel Moved.
Channel settings have been moved.
Couldn’t Access File.
File on the USB storage device could not be accessed for some reason.
Couldn’t Write File.
File could not be saved from the USB storage device.
Current User Changed. [xxx]
Current user was changed to [xxx].
Directory Not Empty!
You attempted to delete a directory, but failed because there were files remaining in the directory.
EFFECT CUE: Turned Off.
CUE was defeated because you switched from the EFFECT popup window to a different screen.
External HA connection conflict!
External HA connection status is different so that External HA data cannot be recalled.
External Power Supply is Cut Off!
The PW800W power supply connected to the M7CL has stopped operating. Alternatively, some other
problem has occurred. If a malfunction has occurred, please contact your Yamaha dealer.
Failed to finish the process! Please restart
the M7CL and try again.
The process has failed to be completed. Restart the M7CL and execute the process again.
File Access is Busy!
The following operation has not been performed yet because the USB storage device is being
accessed.
File Already Exists!
The USB storage device already contains a file/directory with the same name as the one you are
attempting to save, rename, or create.
File Error [xx]!
Internal file access error
File Protected!
Overwriting was not possible because the file on the USB storage device is write-protected.
Illegal Address!
The IP address or Gateway address setting is invalid.
Illegal MAC Address! Cannot Use Ethernet.
Communication via the NETWORK connector is not possible because the MAC address setting has
been damaged for some reason. Please contact your Yamaha dealer.
Illegal Storage Format!
The USB storage device could not be accessed because its format is invalid or unsupported.
Internal Power Supply is Cut Off!
The internal power supply has stopped operating. Alternatively, some other problem has occurred. If a
malfunction has occurred, please contact your Yamaha dealer.
Internal Power Supply is Turned On!
The internal power supply has started up normally.
KEY IN CUE: Turned Off.
KEY IN CUE was defeated because you switched from the DYNAMICS 1/2 popup window to a differ-
ent screen.
Loading Aborted.
Loading from USB storage device was aborted.
Low Battery!
The backup battery voltage is low.
Memory Error! All Memories Initialized.
All data has been initialized because the data in internal backup memory has been lost, due to failure
of the backup battery or some other reason. Please contact your Yamaha dealer.
Monitor Assignment is Restricted to Max. 8
Sources!
The Monitor Define function allows a maximum of eight sources to be selected, but you attempted to
assign more than this.
No copy item selected.
You attempted to paste an item in the Global Paste without first selecting it.
No Response from External HA.
No response from an external AD8HR.
Nothing to Paste!
Paste cannot be performed because there is no data in the copy buffer.
Old type! Load and save as this version
first.
In the STAGE BOX DATA CONVERSION dialog box, you attempted to convert a file other than one
saved using version 3 or later.
Page Bookmarked.
The current screen or popup has been bookmarked.
Password Changed.
The password has been changed.
Power Supply Fan has Malfunctioned!
The cooling fan of the internal power supply has stopped. If a malfunction has occurred, please con-
tact your Yamaha dealer.
Processing Aborted.
Processing was interrupted.
Warning/Error Messages