Filter
Top Products
Audio input/output connections
49
M7CL Owner’s Manual
Connections and setup
4
Before you install I/O cards in slots 1–3, you must check the Yamaha website to determine whether the card is compatible
with the M7CL, and to verify the total number of Yamaha or third-party cards that can be installed in combination with that
card.
Yamaha website
:
http://www.yamahaproaudio.com/
To install an optional mini-YGDAI card, proceed as follows.
1
Make sure that the power is turned off.
2
Loosen the screws that hold the slot cover
in place, and remove the slot cover.
Keep the removed slot cover in a safe place.
3
Align the edges of the card with the guard
rails inside the slot, and insert the card into
the slot.
Push the card all the way into the slot so that the con-
nector at the end of the card is correctly inserted into
the connector inside the slot.
4
Use the screws included with the card to
fasten the card in place.
Malfunctions or incorrect operation may occur if the
card is not fastened.
■ Installing an option card
Slot cover
Card
• Before connecting a separately sold mini-YGDAI I/O card to
the M7CL, you must turn off the power switch of the M7CL and
the PC800W power supply.
Failure to observe this will cause malfunctions or electric
shock.
CAUTION