Filter
Top Products
M7CL Owner’s Manual
Basic operation of the M7CL
3
29
Chapter 3
Basic operation of the M7CL
This chapter explains the M7CL’s user interface and its basic operations.
This section explains the basic procedures you can perform in the M7CL’s top panel and touch
screen. In general, you will operate the M7CL using the appropriate combination of the opera-
tions explained here.
Place your fingertip on a button, knob, or field in the touch
screen, and press lightly. You will mainly use this opera-
tion to switch screens and pages, to select the parameter to
be operated, and to turn a button on/off. Depending on the
type of button, the number may increase or decrease
depending on the location you press.
While pressing your finger on the touch panel, move it in
the left/right direction to specify a range within a character
string. You will use this mainly when assigning a name to
a scene or library.
For the channel select buttons, you can select multiple but-
tons by moving your finger across the touch screen while
continue to press.
Normally you will press a top panel key once, but in some
cases you can access a special function by rapidly pressing
a key twice in succession.
Normally, encoders are turned left/right to change the
value of the corresponding parameter. By pressing an
encoder you can recall a specific screen. For some param-
eters, you can adjust the value in finer steps (greater
detail) by turning the encoder while pressing it.
Basic operations in the top panel / touch screen
Pressing the touch screen
Multiple selection (specifying a
range)
• This makes it easy to select a range of buttons to be turned on/off
together.
HINT
Special operations for keys
Encoder operations