Filter
Top Products
Voice mode
Performance
mode
Multi mode Utility mode File mode Master mode
Multi Voice
mode
Sequence Play
mode
Reference
Voice Edit mode Normal Voice Edit Common Edit
132
Owner’s Manual
[SF2] DELAY
Delay (Delay Time) Determines the delay time before the LFO comes into effect. A higher value results in a longer delay time.
Settings: 0 ~ 127
FadeIn (Fade In Time) Determines the amount of time for the LFO effect to fade in (after the Delay time has elapsed). A higher value
results in a slower fade-in.
Settings: 0 ~ 127
Hold (Hold Time) Determines the length of time during which the LFO is held at its maximum level. A higher value results in a
longer Hold time.
Settings: 0 ~ 127
FadeOut Determines the amount of time for the LFO effect to fade out (after the Delay time has elapsed). A higher value
results in a slower fade-out.
Settings: 0 ~ 127
[SF3] PHASE
Phase Determines the value for the particular step selected in the Step parameter below.
Settings: 0, 90, 120, 180, 240, 270
Offset EL1 - EL4 (Phase Offset
Element1 - Element4)
Determines the offset values of the Phase parameter (above) for the respective Elements.
Settings: +0, +90, +120, +180, +240, +270
[SF4] BOX1 - 3
From this display you can select the destination parameter for the LFO (which aspect of the sound the LFO
controls), the Elements to be affected by the LFO, and the LFO Depth. Three pages (boxes) provided for
setting the destination let you assign multiple destinations.
ElemSw (Element Switch) Determines whether or not each Element is to be affected by the LFO. The Element number (1- 4) is shown
when the LFO is enabled; a dash (-) indicates the LFO is disabled for that Element.
Dest (Destination) Determines the parameters which are to be controlled (modulated) by the LFO Wave.
Settings: amd, pmd, fmd, reso (Resonance), pan, ELFOSpd (Element LFO Speed)
Depth Determines the LFO Wave Depth.
Settings: 0 ~ 127
DptRatio EL1 - EL4 (Depth Offset
Element1 - Element4)
Determines the offset values of the Depth parameter (above) for the respective Elements.
Settings: 0 ~ 127
FadeIn
Max
Time
Key on
FadeIn
Delay
Time
Key on
Max
Delay
Low FadeIn value
Faster fade-in
High FadeIn value
Slower fade-in
Hold
Time
Max
FadeOut
Hold
Max
Time
FadeOut
Time
Hold
Max
Low FadeOut value
Faster fade-out
High FadeOut value
Slower fade-out
Time
Phase
0° 90°
120° 240°
180° 270°