Filter
Top Products
Appendix
Display Messages
179
Owner’s Manual
USB connection terminated. Press
[ENTER].
A break in the connection with the USB storage device has occurred because of an abnormal electric current.
Disconnect the USB storage device from the USB TO DEVICE connector, then press the [ENTER] button.
USB device connecting. Currently recognizing the USB storage device connected to the USB TO DEVICE terminal.
USB device full. The USB storage device is full and no more data can be saved. Use a new USB storage device, or make space
by erasing unwanted data from the USB storage device.
USB device not ready. A USB storage device is not properly inserted in or connected to the S90 ES.
USB device read/write error. An error occurred while reading or writing to/from a USB storage device.
USB device unformatted. The disk is not formatted, or the format is unusable by the S90 ES.
USB device write protected. The USB storage device is write protected, or you have attempted to write to a read-only medium such as CD-
ROM.
USB power consumption exceeded. The power consumption of the USB storage device connected to the USB TO DEVICE connector exceeds the
regulated value.
USB transmission error. An error has occured when communicating with the USB storage device.
Utility stored. The settings in the Utility mode have been stored.
LCD Indication Description