Filter
Top Products
Quick Guide Editing a Program
Editing a Performance
58
Owner’s Manual
Move the cursor to the file (extension: S7A) saved in the operation explained in the previous instructions. If the desired file
was saved in specific folder, enter the folder and select the file. For information on how to select a folder, see the section
“Supplementary information” on page 170. If you have set the Type parameter to “All” in step 3, go on to step 5.
If you have set the Type parameter to “Performance” in step 3, execute the operations in the following box, then go on to
step 5.
After the data has been loaded, a “Completed” message appears and operation returns to the original display.
While the data is being saved/loaded, make sure to follow these precautions:
• Do not remove or eject the media from the USB storage device.
• Do not unplug or disconnect the USB storage device.
• Do not turn off the power of the instrument or the relevant devices.
4
Select the file (“ ”) to be loaded.
When Type is set to “Performance”:
When Type is set to “Performance,” you can specify and load a specific Performance from a file (with the extension
S7A).
Loading data to this instrument automatically erases and replaces any existing data in the User memory.
5
Press the [SF1] EXEC button to actually load the file.
ENTER
EXECUTE
Move the cursor to the file (extension:
S7A) saved in the operation explained
on the previous page.
All the Performances contained in
the selected file are listed on the
display. Move the cursor to the
desired Performance.
Select the desired
Performance to be loaded.
Select the destination Performance number.
CAUTION
CAUTION