Filter
Top Products
Voice mode
Performance
mode
Multi modeUtility modeFile modeMaster mode
Multi Voice
mode
Sequence Play
mode
Reference
Voice Edit mode Plug-in Voice Edit Common Edit
143
Owner’s Manual
Plug-in Voice Edit
These parameters are basically the same as in Normal Voice Edit. Unlike with Normal voices, the Plug-in voices only have one Element for
editing.
n Depending on the particular Plug-in board you are using, some of the parameters described here may not be available. For details, refer to the relevant
owner’s manual of the Plug-in board.
n For details on the current lineup of available Plug-in boards, see page page 99.
Common Edit
[VOICE] → Plug-in Voice selection → [EDIT] → [COMMON]
[F1] GENERAL
[SF1] NAME
Same as in Normal Voice Common Edit. See page 128.
[SF2] PLY MODE (Play mode)
Same as in Normal Voice Common Edit. See page 128.
Please note that Micro Tuning is not available in Plug-in Voice Common Edit.
[SF3] MEQ OFS
(Master EQ Offset)
Same as in Normal Voice Common Edit. See page 129.
[SF4] PORTA (Portamento)
Same as in Normal Voice Common Edit. See page 129.
Please note that Portamento Mode, Time Mode and Legato Slope are not available in Plug-in Voice Common
Edit.
[SF5] OTHER
Same as in Normal Voice Common Edit. See page 129.
Unlike with Normal Voice Edit, the Upper and Lower ranges cannot be independently set here.
[F2] OUTPUT
Same as in Normal Voice Common Edit. See page 129.
[F3] ARP (Arpeggio)
[SF1] TYPE
Same as in Normal Voice Common Edit. See page 131.
[SF2] LIMIT
[SF3] PLAY FX
[F4] CTL SET (Controller Set)
[SF1] SET1/2
Same as in Normal Voice Common Edit. See page 131.
Please note that Element Switch is not available in Plug-in Voice Common Edit.
[SF2] MW (Modulation Wheel)
From this display you can set how the Plug-in Voice responds to the Modulation wheel, by changing the control
depth for the filter, pitch and amplitude (volume).
Filter Determines the depth of control of the Modulation Wheel over the filter cutoff frequency. Negative settings
result in reversed Modulation wheel operation (i.e., moving the wheel up results in less modulation).
Settings: -64 ~ 0 ~ +63
PMod (Pitch Modulation Depth) Determines the depth of control the Modulation Wheel has over pitch modulation. The higher the setting, the
greater the depth of control.
Settings: 0 ~ 127
FMod (Filter Modulation Depth) Determines the depth of control the Modulation Wheel has over filter cutoff modulation. The higher the setting,
the greater the depth of control.
Settings: 0 ~ 127
AMod
(Amplitude Modulation Depth)
Determines the depth of control the Modulation Wheel has over amplitude modulation. The higher the setting,
the greater the depth of control.
Settings: 0 ~ 127
[SF3] AT (After Touch)
This synthesizer gives you a comprehensive set of after touch controls for the Plug-in voice, allowing you to
change the pitch and filter settings, and produce modulation effects (pitch, filter and amplitude) — simply by
pressing down hard on the keys.
Pitch Determines the depth of control of keyboard aftertouch over pitch. You can set a value (in semitones) of up to
two octaves.
Settings: -24 ~ 0 ~ +24
Filter Determines the depth of control of keyboard aftertouch over the filter cutoff frequency.
Settings: -64 ~ 0 ~ +63
PMod (Pitch Modulation Depth) Determines the depth of control that keyboard aftertouch has over pitch modulation. The higher the setting, the
greater the depth of control.
Settings: 0 ~ 127
FMod (Filter Modulation Depth) Determines the depth of control that keyboard aftertouch has over filter cutoff modulation. The higher the
setting, the greater the depth of control.
Settings: 0 ~ 127