Filter
Top Products
Quick GuideConnecting the Computer and Midi devices
Using the S90 ES with computer software
81
Owner’s Manual
Change the Mode by simultaneously holding down the [F6] SHIFT button and pressing the [REMOTE] button.
The following explains which sequencer functions are assigned to which panel controls in the remote control.
n For details about how to operate the Editor, refer to the PDF manual included the Editor.
■ [J], [F], [I], [ IE], [G], [H] buttons
The six MODE buttons are used as transport controls, letting you start/stop playback of the DAW software on the computer.
■ [EDIT], [JOB], and [STORE] buttons
■ [DRUM KIT] button
■ Data dial, [INC/YES] and [DEC/NO] buttons
n You can also move the song position by using the cursor [E] [F] buttons.
2
Select the software to be remote-controlled (Mode A or Mode B).
3
Use the Control sliders and buttons on the S90 ES to remotely control the software.
When the Mode is set to “General”
or “Cubase”
Not used.
When the Mode is set to “Logic” These buttons perform the same functions as those of the [OPTION], [CONTROL] and [ALT] buttons on the Logic
Control.
When the Mode is set to “SONAR” These buttons perform the same functions as those of the [M2], [M3] and [M4] buttons on the Mackie Control.
When the Mode is set to “D.Perf” These buttons perform the same functions as those of the [OPTION], [CONTROL] and [COMMAND] buttons on the
Mackie Control.
When the Mode is set to “General”
or “Cubase”
Not used.
When the Mode is set to “Logic” The button can be used to switch the whether the track/slot number of DAW is displayed on the LCD or not.
When the Mode is set to “SONAR” The button can be used to switch the whether the track/slot number of DAW is displayed on the LCD or not.
When the Mode is set to “D.Perf” The button can be used to switch the whether the send/effect number of DAW is displayed on the LCD or not.
When the [DIAL] menu appears at
the [SF4] button
These controls can be used to set the value for the knob of the DAW controller, for the track/part selected by the cursor.
The Control sliders can also be used, but these help you make fine adjustments to the value that are difficult to make
with the Control sliders.
When the menu does not appear at
the [SF4] button
The buttons can be used to move the song position in the DAW.
F6
REMOTE
Mode A Mode B
PAN/SEND
ASSIGN
MEF
TONE
ARP FX
EQ
These dark bars serve as the cursor, indicating the
track/part currently being edited by the slider.
Moving the slider automatically moves the cursor to
the corresponding track/part.
Press the Control function
button to change the functions
assigned to the [F1] - [F6] and
[SF1] - [SF5] buttons (shown at
the bottom of the display).
Refer to the separate Data List.
Indicates which DAW controller is
assigned to the Control sliders:
knobs or faders. Use the [VOLUME]
button to change the assignment.
Upper row indicates the setting
values for knobs/sliders 1 - 4
on the DAW controller.
Bottom row indicates the
setting values for knobs/sliders
5 - 8 on the DAW controller.
The functions of the buttons on each DAW controller are assigned
to the [F1] - [F6] and [SF1] - [SF5] button on the S90 ES. The
functions to be assigned depend on the software selected in the
Mode A or B. For details, refer to the “Remote Control
Assignments.” on page 83.