Filter
Top Products
Voice mode
Performance
mode
Multi modeUtility modeFile modeMaster mode
Multi Voice
mode
Sequence Play
mode
Reference
Performance Edit mode Part Edit
155
Owner’s Manual
[SF4] AEG
(Amplitude Envelope Generator)
From this display you can set the AEG (Amplitude Envelope Generator) parameters for each Part.
Attack (Attack Time) Determines each parameter of the AEG for each Part.
For details about AEG, see page 114.
Settings: -64 ~ 0 ~ +63
n The Sustain and Release parameters are not available for the Drum Voice Parts. The Sustain parameter is not available
for the Plug-in Parts.
Decay (Decay Time)
Sustain (Sustain Level)
Release (Release Level)
[F5] RCV SW (Receive Switch)
From this display you can set how each individual Part responds to various MIDI data, such as Control Change and Program Change messages. When the
relevant parameter is set to “on,” the corresponding Part responds to the appropriate MIDI data.
Note that two different display types listed below are provided and you can switch between them by pressing the [SF5] button. Each display type features
the same settings in a different format; use the type you feel most comfortable with.
• Display showing four Parts
• Display showing all parameters for one Part
Keep in mind that since all the available parameters cannot be simultaneously displayed in the four-Part display, you will need to use the cursor controls to
scroll the display in order to see and set the other parameters.
Settings: See below. Parameters marked with an asterisk (*) are not available for the Plug-in Part.
CtrlChange (Control Change) Indicates all the Control Change messages.
PB (Pitch Bend) MIDI messages generated by using the Pitch Bend Wheel.
MW (Modulation Wheel) MIDI messages generated by using the Modulation Wheel.
RB (Ribbon Controller)* MIDI messages generated by using the Ribbon Controller.
ChAT (Channel After Touch) MIDI messages generated by pressing and holding the note on the keyboard.
FC1 (Foot Controller 1)* MIDI messages generated by using the optional Foot Controller connected to the rear panel.
FC2 (Foot Controller 2)*
Sus (Sustain) MIDI messages generated by using the optional Footswitch connected to the SUSTAIN jack on the rear panel.
FS (Footswitch)* MIDI messages generated by using the optional Footswitch connected to the ASSIGNABLE jack on the rear
panel.
AS1 (Assign1)*, AS2 (Assign2)* MIDI messages generated by using the ASSIGN1 and ASSIGN2 Control sliders with both the [PAN/SEND] and
[TONE] lamps turned on.
BC (Breath Controller)* MIDI messages generated by using the optional Breath Controller connected to the BREATH jack on the rear
panel.
Exp (Expression) MIDI messages generated by using the optional Foot Controller connected to the rear panel.