Filter
Top Products
Quick GuideEditing a Program
Editing a Performance
57
Owner’s Manual
Saving the edited Performances to a USB storage device
The basic operations are the same as in the Voice mode (page 51).
However, keep in mind that you must set the Type parameter to “All.” When Type is set to “All,” executing the Save operation
saves all the created data, including the Performances as well as the Voices assigned to them, as a single file (extension:
S7A).
Loading Performance data from the USB storage device
These instructions describe how to recall the data saved as an “All” file type (extension: S7A) from the USB storage device,
by using the Load operation.
If the device is divided into several partitions, select the specific partition for use. If the device has several media (e.g.,
discs) inserted, select a specific Slot number.
The “All” file contains all the Performances.
If you wish to load all the Performances, set Type to “All.” In this case, all data that can be created on this instrument will be
loaded in step 5 below. If you wish to load only a specific Performance, set Type to “Performance.”
When Type (file type) is set to “All” and the Load operation is executed, all data that can be created on the instrument will be loaded. This means that
any existing data in User memory will automatically be overwritten and lost. Make sure to save any important data to a USB storage device before
performing the Load operations, especially when Type is set to “All.”
n When Type (file type) is set to “Performance” and the Load operation is executed, the sound of the Performances may not be reproduced properly if
the User Voices assigned to the Performances saved in the file have been changed by editing.
[FILE] → [F2] SAVE
[FILE] → [F3] LOAD
1
Press the [FILE] button to enter the File mode. Then press the [F1] CONFIG button and [SF2] CURRENT
button.
2
Press the [F3] LOAD button to call up the Load display.
3
Select the file type to be loaded.
USB storage device
Performance 001
Performance 002
Performance 003
Performance 128
File extension: S7A
Internal Memory
Performance 001
Performance 002
Performance 003
Performance 128
Loading a specific
Performance when Type
is set to “Performance.”
All Performances are
loaded when Type is set
to “All.”
CAUTION