Filter
Top Products
Quick GuideConnecting the Computer and Midi devices
Creating a Song with the Multi mode
75
Owner’s Manual
The edited Multi can be stored in the Multi Store mode. For details, refer to page 76.
Editing a Multi by using the Control sliders
The four sliders at the top left of the instrument are not only for tweaking the sound while you perform — you can also
use them to edit a Multi, either in the Multi Play mode or the Multi Edit mode.
For details on the parameters edited by the sliders, refer to the descriptions in the Performance mode (page 55).
● When the [PAN/SEND] indicator is turned on:
● When the [TONE] indicator is turned on:
n The settings above are applied as offsets to the AEG and FEG settings in the Performance Edit mode.
● When the [ARP FX] indicator is turned on:
● When the [EQ] indicator is turned on:
● When both the [PAN/SEND] and [TONE] indicators are turned on (by pressing them simultaneously):
n In addition to above functions, Master Effect related parameters (set in the [MULTI/SEQ PLAY] (selecting Multi mode) → Multi selection →
[EDIT] → [COMMON] → [F2] MEQ/MEF → [SF2] MEFF display) can be assigned to these four sliders by pressing the [ARP FX] and [EQ]
buttons simultaneously. The particular parameters are assigned to the four sliders can be set in the [UTILITY] → [F4] CTL ASN → [SF5] MEF
display.
● When the [VOLUME] indicator is turned on:
7
Store the settings as a User Multi.
PAN [MULTI/SEQ PLAY] (Selecting Multi mode) → Multi Selection → [EDIT] → Part Selection → [F2] OUTPUT → [SF1] VOL/PAN → Pan Page 159
REVERB [MULTI/SEQ PLAY] (Selecting Multi mode) → Multi Selection → [EDIT] → Part Selection → [F2] OUTPUT → [SF2] EF SEND → RevSend Page 159
CHORUS [MULTI/SEQ PLAY] (Selecting Multi mode) → Multi Selection → [EDIT] → Part Selection → [F2] OUTPUT → [SF2] EF SEND → ChoSend Page 159
TEMPO [MULTI/SEQ PLAY] (Selecting Multi mode) → Multi Selection → [EDIT] → [COMMOM] → [F3] APP → [SF1] TYPE → Tempo Page 158
CUTOFF [MULTI/SEQ PLAY] (Selecting Multi mode) → Multi Selection → [EDIT] → Part Selection → [F4] TONE → [SF2] FILTER → Cutoff Page 159
RESONANCE [MULTI/SEQ PLAY] (Selecting Multi mode) → Multi Selection → [EDIT] → Part Selection → [F4] TONE → [SF2] FILTER → Resonance Page 159
ATTACK [MULTI/SEQ PLAY] (Selecting Multi mode) → Multi Selection → [EDIT] → Part Selection → [F4] TONE → [SF4] AEG → Attack Page 159
RELEASE [MULTI/SEQ PLAY] (Selecting Multi mode) → Multi Selection → [EDIT] → Part Selection → [F4] TONE → [SF4] AEG → Release Page 159
SWING [MULTI/SEQ PLAY] (Selecting Multi mode) → Multi Selection → [EDIT] → [COMMON] → [F3] APP → [SF3] PLAY FX → Swing Page 158
GATE TIME [MULTI/SEQ PLAY] (Selecting Multi mode) → Multi Selection → [EDIT] → [COMMON] → [F3] APP → [SF3] PLAY FX → Gate Time Rate Page 158
VELOCITY [MULTI/SEQ PLAY] (Selecting Multi mode) → Multi Selection → [EDIT] → [COMMON] → [F3] APP → [SF3] PLAY FX → Velocity Rate Page 158
UNIT MULTIPLY [MULTI/SEQ PLAY] (Selecting Multi mode) → Multi Selection → [EDIT] → [COMMON] → [F3] APP → [SF3] PLAY FX → UnitMultiply Page 158
LO [MULTI/SEQ PLAY] (Selecting Multi mode) → Multi Selection → Part Selection → [F3] EQ → Low Gain Page 159
LO MID [MULTI/SEQ PLAY] (Selecting Multi mode) → Multi Selection → Part Selection → [F3] EQ → Mid Gain Page 159
HI MID – Page 159
HI [MULTI/SEQ PLAY] (Selecting Multi mode) → Multi Selection → Part Selection → [F3] EQ → High Gain Page 159
ASSIGN A Adjusts parameters assigned to these sliders in the [UTILITY] → [F4] CTL ASN → [SF2] ASSIGN display. Page 165
ASSIGN B
ASSIGN 1 Depends on the settings of the Voice assigned to the selected Multi. Page 131
ASSIGN 2
PART Adjusts the level balance among the Parts.
[MULTI/SEQ PLAY] (Selecting Multi mode) → Multi selection → [EDIT] → Part selection → [F2] OUTPUT → [SF1] VOL/PAN → Volume
Page 159
Compare function and Edit Recall (Multi mode)
These are the same as in the Voice mode and Performance mode. For details, refer to page 105.
TIP