Filter
Top Products
Quick Guide Creating Your Original Program Set (Master mode)
Creating Your Original Program Set (Master mode)
92
Owner’s Manual
Use Zone Edit to edit the parameters for each Zone. Use Common Edit to edit the parameters for all of the Zones.
See the next page for details and some setting examples.
Input a name in the [EDIT]
→ [COMMON] → [F1] NAME display.
For detailed instructions on naming a voice, refer to page 27.
Refer to step 5 on page 91.
3
After setting the Mode and Program number which you wish to memorize to the Master, set the Zone
Switch to “on.”
4
Press the [EDIT] button to enter the Master Edit mode.
5
Call up the Common Edit display or Zone Edit display.
6
Select the menu you wish to edit by pressing the [F1] - [F5] buttons and [SF1] - [SF5] buttons, then edit
the parameters in each display.
7
Name the edited Master.
8
Store the edited Master to internal User memory.
Determines the mode that is called up when the
Master number is selected.
Set the Zone Switch to “on.”
Determines the program number that is called up when the Master is selected.
EDIT
JOB STORE
COMPARE
COMMON
ELEMENT/PERF. PART/ ZONE
FAVORITES
DRUM KITS
A. PIANO KEYBOARD GUITAR/
PLUCKED
PRE 5 PRE 6 USER 1
GUITAR
SYN LEAD
ABCD
4321
12
11
10
9
SYN PAD/
CHOIR
SYN COMP
CHROMATIC
PERCUSSION
USER 2
Calling up the Common Edit display
Press the [COMMON] button to call up the
Common Edit display.
In the Edit mode, the [DRUM KITS] button
functions as the [COMMON] button.
While in the Master Edit mode, you can switch
between the Common Edit display and the Zone
Edit display as shown below.
Calling up the Zone Edit display
Press the desired Zone number from the ZONE
[1] - [4] buttons to call up the Zone Edit display.
Indicates a Common Edit
display.
Indicates the display for editing Zone 1.
Common Edit
Zone 1 Edit
Zone 2 Edit
Zone 3 Edit
Zone 4 Edit