Filter
Top Products
Master Play mode
172
Voice mode
Performance
mode
Multi mode Utility mode File mode Master mode
Multi Voice
mode
Sequence Play
mode
Reference
Owner’s Manual
Master mode
The Master Play mode lets you perform a variety of general editing operations on the selected Master. For more detailed and
comprehensive editing operations, use the Master Edit mode. Edited parameters with the exception of some parameters are stored to
internal memory as a User Master.
Master Play mode
[MASTER] → Master selection
[F1] PLAY
OCT (Octave) Indicates Keyboard Octave setting.
This can be changed also with the following operation: [UTILITY] → [F1] GENERAL → [SF2] KBD → Octave.
ASA (ASSIGN A),
ASB (ASSIGN B)
Indicates the functions assigned to the respective Control sliders (printed “ASSIGN A” and “ASSIGN B”) when
the lamps of both the [PAN/SEND] and [TONE] buttons are turned on. The functions are assigned from the
[UTILITY] → [F4] CTL ASN → [SF2] ASSIGN display.
n OCT (Octave), ASA (ASSIGN A), and ASB (ASSIGN B) settings are not independently assignable for each Master. Because of this, these are not stored as an
individual Master in the Master Store mode (page 175).
AS1 (ASSIGN 1),
AS2 (ASSIGN 2)
Indicates the values obtained by controlling the respective Control sliders (printed “ASSIGN 1” and “ASSIGN
2”) when the lamps of both the [PAN/SEND] and [TONE] buttons are turned on. The functions assigned to
these sliders depend on the setting of the Voice selected as a Master program.
[SF1] ARP1 (Arpeggio 1) -
[SF5] ARP5 (Arpeggio 5)
You can call up the Arpeggio types by pressing these buttons to which the Arpeggio types are assigned.
The Arpeggio type assigned to each button depends on the program (Voice, Performance, Multi) selected as a
Master.
[F2] MEMORY
From this display you can set basic parameters for the Master, including the mode that is called up with the Master and the program number.
Mode Determines the mode that is called up when the Master number is selected.
Settings: Voice, Performance, Multi/SeqPlay.
Memory Determines the Program number that is called up when the Master is selected.
Settings:
When the Mode is set to Voice: Select a Voice back and number. Refer to the instructions page 30.
When the Mode is set to Performance: Select a Performance number. Refer to the instructions on page 34.
When the Mode is set to Multi: Select a Multi number. Refer to the instructions on page 71.
ZoneSwitch Determines whether the Zone function is used (on) or not (off). See page 93 for details about the Zone function.
n When the Mode is set to “Voice” or “Performance” and the Zone Switch is turned on, only Zone 1 can be used in the
default setting (playing Zones 2-4 will produce no sound). You can use these Zones by setting various parameters in the
Master Edit mode.