Filter
Top Products
Appendix
Troubleshooting
190
Owner’s Manual
• When the Multi produces no sound, are the output port/channel of each track in the external sequencer and the receive
port/channel of each Part in the Multi set appropriately?
n Keep in mind that the Output ([F2] OUTPUT) setting of the Chain Step last selected in the Sequence play mode is effective.
• When the Multi produces no sound, are the Chain Step settings in the Sequencer Play mode set appropriately?
n Keep in mind that the Output ([F2] OUTPUT) setting of the Chain Step last selected in the Sequence play mode is effective.
■ Playback continues without stopping.
• When the [ARPEGGIO] button is turned on, press it so that its lamp is turned off. (page 17)
■ Distorted sound.
•Are the effect settings appropriate? (Some effect types or settings can cause distortion.)
•Are the filter settings appropriate? (Excessively high filter resonance settings can cause distortion.)
• Is the volume set so high that clipping is occurring?
■ Sound is choppy and intermittent.
•Are you exceeding the maximum polyphony of the S90 ES ? (page 188)
■ Only one note sounds at a time.
• Is the Mono/Poly parameter set to “mono”?
If you wish to play chords, set this parameter to “poly.”
■ Pitch or intervals are wrong.
• Is the Master Tune parameter set at a value other than “0”?
• Is the Note Shift parameter set at a value other than “0”?
• When the voice produces a wrong pitch, is the appropriate tuning system selected from Micro Tuning parameter?
[MUTLI/SEQ PLAY] (selecting Multi mode) → [EDIT] → Part selection → [F1] VOICE → [SF2] MODE → Receive Ch (page 159)
[MUTLI/SEQ PLAY] (selecting Sequence Play mode) → Chain Step selection → [F2] OUTPUT → PORT (page 162)
[MUTLI/SEQ PLAY] (selecting Sequence Play mode) → Chain Step selection → [F2] OUTPUT (page 162)
[VOICE] → [EDIT] → [COMMON] → [F6] EFFECT (page 133)
[PERFORM] → [EDIT] → [COMMON] → [F6] EFFECT (page 152)
[MULTI/SEQ PLAY] (selecting Multi mode) → [EDIT] → [COMMON] → [F6] EFFECT (page 158)
[VOICE] → [EDIT] → Element/Key selection → [F3] FILTER (page 135)
[PERFORM] → [EDIT] → Part selection → [F4] TONE → [SF2] FILTER (page 154)
[MUTLI/SEQ PLAY] (selecting Multi mode) → [EDIT] → Part selection → [F4] TONE → [SF2] FILTER (page 159)
[UTILITY] → [F1] GENERAL → [SF1] TG → Volume (page 163)
[VOICE] → [EDIT] → [COMMON] → [F2] OUTPUT → Volume (page 129)
[PERFORM] → [EDIT] → [COMMON] → [F2] OUT/MEF → [SF1] OUT → Volume (page 150)
[MUTLI/SEQ PLAY] (selecting Multi mode) → [F2] VOL/PAN → Volume (page 157)
[VOICE] → [F4] PORTA → Mono/Poly(page 127)
[PERFORM] → [EDIT] → Part selection → [F1] VOICE → [SF2] MODE → Mono/Poly (page 152)
[MUTLI/SEQ PLAY] (selecting Multi mode) → [EDIT] → Part selection → [F1] VOICE → [SF2] MODE → Mono/Poly (page 159)
[UTILITY] → [F1] GENERAL → [SF1] TG → Tune (page 163)
[UTILITY] → [F1] GENERAL → [SF1] TG → NoteShift (page 163)
[VOICE] → [EDIT] → [COMMON] → [F1] GENERAL → [SF2] PLY MODE → M.Tuning No (page 128)