Filter
Top Products
Quick GuideConnecting the Computer and Midi devices
Using mLAN
89
Owner’s Manual
mLAN Audio/MIDI signal routing
Connecting mLAN16E-equipped mLAN devices allows for data transmission of up to eight audio input channels (four stereo
channels) and sixteen output channels, as well as four MIDI in/out ports. Try setting up your own mLAN system, referring to
the illustration below.
1 MIDI
The MIDI settings are the same as those for connecting the USB cable.
2 Audio output channels 1 - 14 (as1 - 14)
When selecting a Drum Voice, Performance or Multi, each Drum key or Part can be output from a specific mLAN audio
output (channels 1 - 14). For details about the output settings, refer to “Connecting to a Mixer” on page 63.
3 OUTPUT L and R jacks (L&R)
The signals from the OUTPUT L and R jacks (when playing the keyboard using a Normal Voice) are sent from mLAN output
channels 15 and 16.
4 Audio input Parts of the Performance and Multi
You can also use the audio from mLAN input channels 1 - 8 as the Audio Input Part(s). Refer to the “Using the microphone
and audio device sounds” on page 38 and the “Audio Input Part (AUDIO IN)” on page 118.
5 mLAN Monitor Switch
To monitor the sounds from mLAN output channels 1 - 14 and mLAN input channels 1 - 8 (through the OUTPUT L and R
jacks on the rear panel), set the following parameter set to “on.”
[UTILITY] → [F2] I/O → [SF2] OUTPUT → mLANMonitorSw (mLAN Monitor Switch) = on
1 MIDI
mLAN16E
Powered speakers
S90 ES
Computer or mLAN device
IEEE1394
cable
mLAN
output
port 1 – 4
mLAN
output
channels
port 1 – 4
mLAN
output
channels
15 and 16
mLAN input cannels 1 – 8
(Stereo 4 channels)
mLAN
input
port 1 – 4
2 Audio output
channels 1 – 14
(as 1 – 14)
3 OUTPUT L/R
jack(L&R)
4 Audio input Parts
of Performance/
Multi
5 mLAN16E
Monitor
Switch