Filter
Top Products
Voice mode
Performance
mode
Multi mode Utility mode File mode Master mode
Multi Voice
mode
Sequence Play
mode
Reference
File mode
168
Owner’s Manual
File mode
The File mode provides tools for transferring data between the instrument and USB storage device.
n For details about USB storage devices, see page 20.
n For details about the relationship between the data created on this synthesizer and the files for saving, see page 171.
n For information on how to select a file/folder and how to create a new folder, see page 170.
File mode
[FILE]
[F1] CONFIG
[SF1] CURRENT
From this display you can set the parameters about the currently recognized USB storage device.
USB Device Select the partition in the device. You can transfer files between the partition in the slot selected below and the
S90 ES.
FSlot If using a USB storage device compatible with multiple media, select the slot number. The desired partition can
be selected in the right box.
Status Indicates the status of the storage device recognized by this synthesizer.
FFree Indicates the amount of unused (free) memory on the current device.
FTotal Indicates the amount of total memory on the current device.
[SF2] FORMAT
Before you can use a new USB storage device with this synthesizer, you will need to format it. Use this
operation to format the USB storage device and assign a Volume Label to it. For instructions formatting, see
page 170.
Slot Selects a slot to be accessed when the connected USB storage device supports multiple media.
Settings: CARD, USB.
Type Specifies the partition to be formatted.
Settings: all, partition1 ~ 4
Volume Label Names the Volume Label. For instructions on naming, refer to page 27 in the Basic Operation section.
[F2] SAVE
This operation lets you save files to a USB storage device.
For instructions on saving files of the various data types, refer to the
following pages: page 51 (Voices), page 57 (Performances), page
76(Multis).
TYPE Among the various types of data created on this synthesizer, you can save all of them or only a specific type of
data to a single file. This parameter determines which specific type of data will be saved to a single file.
Settings:Refer to “Supplementary information” on page 171.
[SF1] EXEC
Executes saving of the file into the selected folder.
n The [ENTER] button on the panel is used to call up the contents of the selected folder.
[SF2] SETNAME
Copies the file/folder name selected in the File/Folder selection box into the File name column.
[F6] NEW
Creates a new folder in the current folder.
[F3] LOAD
This operation lets you load files from a USB device to this
synthesizer.
TYPE Among the various types of data saved in a single file on a USB storage device, you can load all of them or
only a specific type of data to this synthesizer. This parameter determines which specific type of data will be
loaded from a single file.
Settings: Refer to “Supplementary information” on page 171.
[SF1] EXEC
Executes loading of the file.
n The [ENTER] button on the panel is used to call up the contents of the selected folder.
File name
File/Folder selection box
File/Folder selection box
File/Folder selection box
Indicates the current folder (directory).