Filter
Top Products
Quick Guide Connecting the Computer and Midi devices
Using the S90 ES with computer software
82
Owner’s Manual
■ Control sliders
Assigns the functions of eight sliders and eight knobs on the DAW controller (01X, Mackie Control, and Logic Control) to the
four Control sliders on the S90 ES. You can switch between fader and knob control by pressing the [VOLUME] button.
■ Control function buttons, [F1] - [F6] buttons, [SF1] - [SF5] buttons
.
n Among the functions assigned to the [F1] - [F6] buttons and [SF1] - [SF5] buttons, the functions indicated with brackets (such as [DIAL]) are not
related to the Mackie Control, Logic Control and 01X but are unique to the S90 ES.
■ Cursor [E][F] buttons
By moving the cursor left/right, you can change the track or part to controlled by the data dial and [INC/YES]/[DEC/NO]
buttons. Pressing the Cursor [
F] button moves through the columns in succession (1, 2, 3, 4...). After 4, the cursor is
hidden and wraps around to 1.
Press the [SF5] KN 5 - 8 (KN 1 - 4) button to move the cursor up/down.
■ Cursor [▲][▼] buttons
■ [EXIT] button
■ Bank, Group [A] - [H], Number [1] - [16] buttons
These buttons are assigned to perform the same functions as the buttons directly over the faders on the 01X, Mackie Control
and Logic Control.
When assigning the functions of
faders to the Control sliders (The
[VOLUME] button lights.)
Controls the volume of each track (part). Pressing the [SF5] button changes which group of faders (faders 1 - 4 or
faders 5 - 8 on the DAW controller) is assigned to the Control sliders on the S90 ES.
When assigning the functions of
knobs to the Control sliders (The
[VOLUME] button turns off.)
Controls various parameters of each track (part). As with the fader assignment above, pressing the [SF5] button
changes which group of knobs is assigned (knobs 1 - 4 or knobs 5 - 8).
The eight knobs on the DAW controller can also be used as switches. The switch function corresponding to the knob
track (part) at the cursor position is also assigned automatically to the [ENTER] button, since the Control sliders on the
S90 ES do not have a switch function.
When the Mode is set to “General” These buttons are assigned to perform the same functions as the panel buttons on the 01X. The corresponding names
of the 01X panel buttons are also indicated at the bottom of the display of the S90 ES.
When the Mode is set to “Logic” These buttons are assigned to perform the same functions as the panel buttons on the Logic Control. The
corresponding names of the Logic Control panel buttons are also indicated at the bottom of the display of the S90 ES.
When the Mode is set to “Cubase,”
“SONAR,” or “D.Perf”
These buttons are assigned to perform the same functions as the panel buttons on the Mackie Control. The
corresponding names of the Mackie Control panel buttons are also indicated at the bottom of the display of the S90
ES.
When the Mode is set to “General” These buttons are assigned to the functions of the DISPLAY [▲][▼] buttons on the 01X.
When the Mode is not set to
“General”
These buttons are assigned to the functions of the cursor [▲][▼] buttons on the Mackie Control and Logic Control.
When the Mode is set to “General” The button is assigned to the function of the [PAGE SHIFT] button on the 01X.
When the Mode is not set to
“General”
Not used.
When the Mode is set to “General” Numbers [1] - [8] and [TRACK SELECT] buttons
These buttons are assigned to the functions of the nine [SEL] buttons on the 01X.
Numbers [9] - [16] and [MUTE] buttons
These buttons are assigned to the functions of the nine [ON] buttons on the 01X.
When the Mode is not set to
“General”
[PRE1] - [PLG3] buttons
These buttons are assigned to the functions of the eight [REC/RDY] buttons on the Mackie Control and Logic Control.
Group [A] - [H] buttons
These buttons are assigned to the functions of the eight [SOLO] buttons on the Mackie Control and Logic Control.
Numbers [1] - [8] buttons
These buttons are assigned to the functions of the eight [MUTE] buttons on the Mackie Control and Logic Control.
Numbers [9] - [16] buttons
These buttons are assigned to the functions of the eight [SELECT] buttons on the Mackie Control and Logic Control.