Filter
Top Products
Using the S90 ES with computer software
83
Owner’s Manual
Quick GuideConnecting the Computer and Midi devices
Remote Con trol Assignments
When controlling Multi Part Editor/SQ01 V2
Functions of 01X assigned to [F1] - [F6] and [SF1] - [SF5]
buttons
Checking the Remote Control assignments
If you're unsure as to which software function has
been assigned to a particular panel control on the S90
ES, this convenient feature lets you quickly check it
from the display.
1 In the Remote Control mode, press the
[INFORMATION] button to call up the
information display, indicating the function of
the last pressed button.
2 Press the button for which you want to check
the assignment.
This display shown above appears when you press the [F]
([PERFORM]) button. In this way, you can check each button's control
assignment simply by pressing it.
3 Press the [INFORMATION] button again to
return to the Remote Control mode.
n While the Information display is shown, the panel buttons
cannot be used to control the computer software.
Button/Controller
names on 01X
Functions
In all modes:
[DISPLAY UP]
[DISPLAY DOWN]
Changes the parameter to be edited.
[NAME/VALUE] Changes the indication of the parameter name and its value.
[SHIFT]+[NAME/VALUE] Changes the meter display mode.
[ON] (in the normal status)
Tur ns each channel off or on (mutes/unmutes the signal).
[SHIFT] + [ON] of the Master
Channel (in the normal
status)
Tur ns all the channels including the Master Channel off or on
(mutes/unmutes the signal).
[SHIFT] + [ON] of each
channel (in the normal status)
Tur ns all the channels with the exception of the Master
Channel off or on (mutes/unmutes the signal).
[ON] (with the [SOLO] lamp
turned on)
Tur ns the Solo function of each channel on or off (applies to
the Channel Module/Software Synthesizer Module)
[SHIFT] + [ON] (with the
[SOLO] lamp turned on)
Tur ns the Solo function of each channel on or off (applies to
the Channel Module/Software Synthesizer Module)
[SOLO] Changes the function of the [ON] button to the Solo function.
[SHIFT]+[SOLO] Determines the Solo/Mute settings of the selected tracks in
the Track View window.
[SHIFT]+[REC RDY] Turns track recording on or off.
[AUDIO] Starts the Audio Mixer or moves the Audio Mixer Window to
the front of the computer screen. This button operation
applies to the Channel Module software.
[INST] Starts the Audio Mixer or moves the Audio Mixer Window to
the front of the computer screen. This button operation
applies to the Software Synthesizer Module.
[MIDI] Starts the MIDI Editor (such as the Multi Part Editor) or moves
it to the front of the computer screen.
SF1
F1 F2 F3 F4 F5 F6
SF2 SF3 SF4 SF5
SF1
F1
SF2
F2 F3 F4 F5 F6
SF3 SF4 SF5
INFORMATION
PAGE1
FADER BANKS
PAN/SEND
PAN/SEND
TONE
MIXER/LAYER
ARP FX
PAGE2
EQ
TONE
TONE
ARP FX
ARP FX
EQ
SEND
PA NDYNAMICS EFFECT BANK-L BANK-R SHIFT
GROUP NAME/VALUE DIAL RESET KN1-4/5-8
FLIP
SOLO REC/RDY BANK-L BANK-R SHIFT
NAME/VALUE DIAL RESET KN1-4/5-8
INST
AUDIO MIDI OTHER BANK-L BANK-R SHIFT
AUX/BUS NAME/VALUE DIAL RESET KN1-4/5-8
EQ LOW
SEL CH EQ LOW-MID EQ HIGH BANK-L BANK-R SHIFT
EQ HIGH-MID NAME/VALUE DIAL RESET KN1-4/5-8
F5
F1 F2 F3 F4 SHIFT
F6 F7 F8 KN1-4/5-8
BANK-L BANK-R SHIFT
NAME/VALUE DIAL RESET KN1-4/5-8
CURSOR-L
CURSOR-DWN
CURSOR-UP ZOOM BANK-L BANK-R SHIFT
CURSOR-R SCRUB DIAL RESET KN1-4/5-8