Filter
Top Products
Basic Operation
Information Display
27
Owner’s Manual
Information Display
This convenient function lets you call up relevant details about the selected mode—simply by pressing the [INFORMATION]
button. For example, when the Voice mode is active, you can quickly check information about which voice bank is selected,
what Play mode (poly or mono) is being used, which effects are applied, and so on.
For details, see page 176.
Note (Key) settings
Several parameters let you set a key range for a function—for example, in setting up a keyboard split—by specifying certain
note values. You can use the [INC/YES] and [DEC/NO] buttons or data dial to set these parameters, or you can directly enter
the values from the keyboard by pressing the appropriate keys (as shown below).
n About the note name assigned to each key, see page 16.
Naming
You can freely name data you’ve created, such as voices and files saved to the USB storage device. The chart below lists
the types of data that can be named along with the operations for calling up the respective naming displays.
First, call up the name input display according to the above table, then, move the cursor by using the Cursor button to the
desired location and input a character. See below for details.
n Since the name of the program is part of the data, make sure that you properly save the program after naming it.
Data types that can be named How to call up the naming display Page
Voice [VOICE] → [EDIT] → [F1] GENERAL → [SF1] NAME 128
[MULTI/SEQ PLAY] → [F3] VOICE → Normal Voice Selection → [F5] VCE ED 161
Performance [PERFORM] → [EDIT] → [F1] GENERAL → [SF1] NAME 150
Multi [MULTI/SEQ PLAY] → [EDIT] → [F1] GENERAL → [SF1] NAME 158
Master [MASTER] → [EDIT] → [F1] NAME 173
Volume Label of the USB storage device [FILE] → [F1] CONFIG → [SF3] FORMAT 168
File/Folder saved to the USB storage device [FILE] → [F2] SAVE or [F4] RENAME 168
INFORMATION
INFORMATION
When Note Limit is selected, the [KBD] mark appears,
indicating that you can use the keyboard to set the
value. Simultaneously hold down the [INFORMATION]
button and press the appropriate key.