Filter
Top Products
Vocal Harmonist function
G-70 Music Workstation
r
51
Note: If you work with a TV set, do not forget to select the
correct channel (“AV”, or something to that effect, see the
manual that came with your set).
(6) Press the [EXIT] button to return to the main page.
Displaying scores
→ Only available for Standard MIDI File playback, and
only in the G-70’s display.
If you don’t remember the notes of the song you are
about to play, you can ask the G-70 to display them on-
screen:
(1) Select a song (page 38).
(2) Press the [LYRICS&SCORE] button.
(3) Press the [SCORE] field if it doesn’t “light”.
The display changes to:
(4) Start song playback and watch the display.
(5) Press the [ZOOM¥+] button if the notes are difficult
to read.
Press [ZOOM¥–] to select the normal size again.
Now maybe the way in which the notes are displayed
is not quite right. In that case…
(6) Press the [OPTIONS] button.
There are several things you can decide here:
• Do you want see the notes of one song part, or of
two? If you only need one, activate [1¥STAFF]. To see
two parts, activate [2¥STAVES]. In the latter case, the
display changes to:
• Select the track(s) whose notes should be displayed:
Press the (corresponding) [TRACK] field and use the
[DATA÷ENTRY] dial to select the track.
“STAFF 1” is the upper staff, “STAFF 2” the lower one.
• If you happen to know the key your song is in, press
the [KEY] field and use the [DATA÷ENTRY] dial to
select the correct setting.
This is only necessary to avoid that the score is clut-
tered up with accidentals (sharps and flats that alter
the notes’ pitch ad hoc).
• Use the and fields to specify what clef should
be used for displaying the notes. Press whichever is
more convenient for you (this setting has no effect
on the octave the notes are actually played in – it is
only used for display purposes.
• Use the buttons in the PITCH row to specify how the
note names should be displayed next to the note
symbols:
[OFF] means that the note names are not displayed,
[A,B,C] refers to the Anglo-Saxon/German/Dutch sys-
tem, while [DO,RE,MI] corresponds to the French/Ital-
ian system.
• Use the buttons in the DRUM RANGE row to specify
which notes of the drum track (usually track 10)
should be displayed. [FILTER] means that you will only
see the notes between note numbers 35 and 59.
[FULL], on the other hand, means that you will see all
drum notes.
This setting is only used if you set (one of) the TRACK
field(s) to “10”, or the number of a track that plays a
drum part. Most drum parts only trigger MIDI notes
between numbers 35 and 59.
(7) Press [Back] to see the notes again.
If necessary, you can return to the OPTIONS page to
correct settings you don’t like after all.
EXIT
LYRICS & SCORE