362 Chapter 5
Command Definitions L-O
LISTSPF
OWNER This is the fully qualified name of the creator of the spool file.
Below is an example of the optional second line of the display, followed by an explantion of
each display field.
FORMID JOBNAME COPSRM SECTS RECS PAGES DATE TIME
TESTJOB 1 250 500 ~9 12/20/88 8:39
FORMID An 8-character display, the first of which is a letter. If an F appears in the
RSPFN column but this field is blank, it means that the file has a forms
message but formid was not specified.
JOBNAME The job or session name of the user who created the spool file or, for a job
input spool file, the name of the job that will use the input spool file as its
$STDIN file..
COPSRM The number of copies of this file that remain to be printed, including any
currently printing copy.
SECTS The number of sectors occupied by the spool file.
RECS The number of records in the spool file.
PAGES The number of physical pages in the spool file. This quantity is accurate
only for CIPER protocol, 2680/88 page printers, and HP5000/F1xx page
printers, and then only if the device has printed at least one complete copy.
The device keeps track of the pages as they are printed and returns the
correct count at the end of the copy. Until the actual count is known, an
approximate count calculated as number_of_records ÷ 60, and denoted by a
leading tilde (~) is displayed.
For serial printers, even the count without the tilde is approximate
because it is calculated as a best guess from the spool file data. It is not
returned by the device because serial printers have no provisions for
reporting this information.
DATE The date that the file first entered the READY state (mm/dd/yy).
TIME The time that the file first entered the READY state in 24-hour form
(hh:mm).
STATUS The status display has the following format:
INPUT SPOOL FILES OUTPUT SPOOL FILES
ACTIVE = 1; CREATE = 2; READY = 3;
OPEN = 2; DEFER = 1; SELECTED = 4;
READY = 3; DELPND = 0; SPSAVE = 1;
PRINT = 1; XFER = 0;
PROBLM = 0;
TOTAL IN FILES = 6; TOTAL OUTFILES = 8;
IN SECTORS = 144; OUT SECTORS = 13090;
OUTFENCE = 6
OUTFENCE = 10 FOR LDEV 6
This display consists of three parts. The values in the first two parts
represent only those spool files selected for display.
