576 Chapter 7
Command Definitions S-SO
SHOWIN
SHOWIN
Reports the status of input device files.
Syntax
SHOWIN[#Innn STATUS ] [ ;SP] [ ;item[;item [ ;...] ] ]
Parameters
#Innn Identifies the particular input device file for which information is to be
displayed. Default is that MPE/iX displays information for all input device
files used by the logon job or session.
STATUS Summarizes the status information for all current input device files.
Default is that MPE/iX displays information for all input device files used
by the logon job or session. The information appears in following format:
8 FILES DISPLAYED
0 ACTIVE
0 READY;INCLUDING 0 SPOOFLES, 0 DEFERRED
8 OPENED; INCLUDING 0 SPOOFLES
0 SPOOFLES; 0 SECTORS
0 LOCKED; INCLUDING 0 SPOOFLES
SP Displays status information for the currently spooled input device files
associated with the logon job or session. Default is a display of status
information for all input device files.
item Displays the status of current input device files as identified. Default is
that MPE/iX displays status information for all input device files used by
this job.
Syntax for Item
[ DEV=ldev] [ JOB={ @J @S @ [ #] Jnnn [ #] Snnn } ] [ { ACTIVE |
OPENED | READY } ]
Parameters for Item
ldev Displays the status of input device files identified by logical device number
ldev.
JOB= Displays the status of input device files. JOB= may be one of the following
options:
@J Displays the status of input device files for all jobs.
@S Displays the status of input device files for all sessions.
@ Displays the status of device files for all jobs and sessions.
(Default.)
