Filter
Top Products
Before you start editing (Menu)
48
r
• [D≈BEAM]: Allows you to assign the desired
function to the D Beam controller. . . . . . . .p. 41
• [FOOTSWITCH]: Allows you to assign the
desired function to an optional DP-2, DP-6, or
BOSS FS-5U footswitch.. . . . . . . . . . . . . . . . .p. 43
• [VOCAL≈HARMONIZER]: Provides access to set-
tings with which you can fine-tune the Vocal
Harmonizer’s behavior for your own voice,
transformed voice signals, and harmonies. You
can also set the equalizer by pressing the
[Equalizer] field.
Use the fields at the right edge of the display to
select the part (mode) whose settings you wish
to change . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p. 61
• [MARK≈JUMP]: Allows you to program the
desired locations that can be recalled using the
MARK JUMP [1]~[4] buttons. . . . . . . . . . . . . .p. 69
• [MIDI]: Provides access to the DisCover 5’s MIDI
parameters.. . . . . . . . . . . . . . . . . . . . . . . . . . . .p. 99
• [UTILITY]: Allows you to specify the following:
Which MIDI Set and/or User Program to load
when the DisCover 5 is switched on.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 85 and 104
How the TONE/USER PROGRAM buttons should
work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 35
Whether the Multi-FX should be linked to the
Tone selected for the Upper part . . . . . . . . . p. 54
Whether the pre-programmed effect settings
should be loaded each time you press a button
in the VOCAL HARMONIZER section.. . . . . . p. 55
To set playback-specific parameters (Player)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 18
To select the Keyboard parts that should be
affected by an optional expression pedal – and
how this should be done (FootPedal) . . . . . p. 44
(3) Press the [EXIT] button to return to the main
page.