Filter
Top Products
Working with the Mixer & using effects
56
r
(1) Press the [MENU] button.
(2) Press the [UTILITY] field.
If the above page is not displayed, press the
[Back≈to≈Global] field in the upper left corner.
(3) Press the [Harmonizer≈Effect] field.
(4) Use the [VALUE] dial to toggle between
“Auto” and “Manual”.
Select “Auto” to use the most suitable effects
presets for each preset.
Select “Manual” to leave the last effect settings
you made intact (and change them, if neces-
sary), then write them to a User Program
(page 80).
(1) Press the [MIXER/EFFECT] button.
The display changes to:
(2) Press the [Vocal≈Effect] field.
(3) Press the [Effect≈Type] field.
(4) Decide which effects processor you wish to
edit:
• To edit a VOICE effect, press the [Reverb] or
[Delay] field below “VOICE EFFECT”.
• To edit a HARMONY effect, press [Reverb],
[Chorus], or [Delay] below “HARMONY EFFECT”.
Only the HARMONY parts (Vocoder, Small,
Ensemble) have a Chorus processor. The param-
eters and presets for the Reverb and Delay pro-
cessors differ between the VOICE EFFECTS and
HARMONY EFFECTS sections.
(5) Press the VOCAL HARMONIZER button for
which you want to program the effect and
talk/sing into the microphone while setting
the following parameters.
If necessary, you can use the [VOICE] or
[HARMONY] knob to temporarily set the vol-
ume of the part you don’t want to hear to “0”.
Reverb for VOICE EFFECTS
• Press the field of the Reverb type you wish to
use.
Note: The choice of the preset also affects the settings
of the parameters below. Always start by selecting the
type and then set the programmable parameters.
The names of these types ([Studio]~[Church]) are
probably self-explanatory. You may notice that
the Reverb character changes as you select dif-
ferent types.
®
And now… the Vocal Harmonizer effects
Reverb