Filter
Top Products
Owner’s Manual
89
If the [MUTE] indicator “lights” ( ), that pas-
sage is indicated as on the INSTRUMENT
page.
Note: Most tracks only use one Tone/Drum Set, so that
activating [MUTE] means that the track in question
never sounds.
(6) If you are happy with your changes and wish
to preserve them, press the [SAVE] field. The
display changes to:
(7) If necessary, change the song’s name.
You only need to do this if you want to preserve
the original version. The edits you have just per-
formed can only be read by the DisCover 5, and
so are of little use to other sequencers or SMF
players: they simply ignore it. So you might as
well save the song under its original name.
Besides, you can also save the song to a differ-
ent card or disk.
See page 29 for how to enter a different name.
(8) Press the [SMART≈MEDIA] or [FLOPPY] field to
select the Save destination.
(9) Press the [EXECUTE] field.
If you selected the drive that contains the orig-
inal version, the following message is displayed:
If you pressed the [FLOPPY] field, the message
reads “SAME NAME ON DISK”.
• Press the [REPLACE] field to overwrite the old
version.
Press the [EXIT] button on the DisCover 5’s front
panel if you do not want to overwrite this song
and return to the previous page. Then enter a
different name (or select a different media).
If the song doesn’t yet exist on the selected
SmartMedia card or floppy disk, the data are
saved, and the following message appears:
Note: If you also want to change other song settings,
there is no need to save the song just yet. The other
SONG MAKEUP TOOLS pages also provide [SAVE] but-
tons.