Yamaha 02R96 Musical Instrument User Manual


 
Viewing Channel Fader Settings 111
02R96—Owner’s Manual
Aux Sends
Below is the Fader View page for the Aux Sends.
ON/OFF: This is the On/Off parameter of the currently selected Aux Send. See “Aux Send
Pages” on page 80 for more information.
Fader: This indicates the fader position of the currently selected Aux Send. The fader knob
appears highlighted when the fader is set to 0.0 dB. The fader position is displayed numer-
ically below the fader. See “Settings Aux Send Master Levels” on page 86.
Meters: These meters indicate the levels of the currently selected Aux Send and its partner.
The metering position is displayed below them.
GROUP: These buttons indicate which Fader, Mute, EQ, or Comp group, if any, the cur-
rently selected Aux Send is in.
Stereo Out
Below is the Fader View page for the Stereo Out. The settings of the left and right channels
of the Stereo Out can be viewed individually. Use the STEREO [SEL] button to toggle
between the left and right channels.
BAL: This is the Balance parameter for the Stereo Out. See “Balancing the Stereo Out” on
page 75 for more information.
ON/OFF: This is the On/Off parameter of the Stereo Out. See “Muting the Stereo Out
(ON/OFF)” on page 74 for more information.
Fader: This indicates the fader position of the Stereo Out. The fader knob appears high-
lighted when the fader is set to 0.0 dB. The fader position is displayed numerically below the
fader. See “Setting the Stereo Out Level” on page 74 for more information.
Meters: These meters indicate the levels of the Stereo Out. The metering position is dis-
played below them.
GROUP: These buttons indicate which Fader, Mute, EQ, or Comp group, if any, the Stereo
Out is in.