Filter
Top Products
Control Surface 11
02R96—Owner’s Manual
SELECTED CHANNEL Section
The subsections of the SELECTED CHANNEL section are explained below.
ROUTING
A ROUTING DISPLAY button
This button is used to select the following pages: Input Channel Routing, Bus to Stereo, and
Bus to Stereo Library. See “Routing Input Channels” on page 66 and “Sending Bus Outs to
the Stereo Out” on page 78 for more information.
B FOLLOW PAN button
This button determines whether or not the currently selected Input Channel’s pan setting
is applied to the Bus Outs. Its indicator lights up when it’s pressed. See “Routing Input
Channels” on page 66 for more information.
C STEREO button
This button is used to route the currently selected Input Channel to the Stereo Out. Its indi-
cator lights up when it’s pressed. See “Routing Input Channels” on page 66 for more infor-
mation.
D DIRECT button
This button is used to route the currently selected Input Channel to its Direct Out. Its indi-
cator lights up when it’s pressed. See “Routing Input Channels” on page 66 for more infor-
mation.
E ROUTING 1–8 buttons
These buttons are used to route the currently selected Input Channel to the Bus Outs. The
button indicators of Bus Outs to which the Input Channel is routed light up. See “Routing
Input Channels” on page 66 for more information.
EQUALIZER
EQ ON
LOW
Q
FREQUENCY
Q
FREQUENCY
Q
FREQUENCY
Q
FREQUENCY
DISPLAY
GAIN
LOW MID
GAIN
HIGH MID
GAIN
HIGH
GAIN
GATE ON COMP ON
GATE
COMP
RANGE
RATIO
ATTAC K
ATTAC KTHRESHOLD
THRESHOLD
DYNAMICS
DISPLAY
GATE / COMP
DECAY
RELEASE
HOLD
GAIN
SELECTED CHANNEL
LINK GRAB EFFECT
L
EVEN
R
LR
PAN / SURROUND
DISPLAY
ODD
DISPLAY ACCESS
PHASE /
INSERT
DELAY
12
3
4
56
78
STEREOFOLLOW PAN DIRECT
DISPLAY
ROUTING
dB
Hz
kHz
dB
Hz
kHz
dB
Hz
kHz
dB
Hz
kHz
125 1.00 4.00 10.0
12
3
4
56
78
STEREOFOLLOW PAN DIRECT
DISPLAY
ROUTING
1
2
3 4
5