General Spec 261
02R96—Owner’s Manual
Option Input (SLOT 1–4) Available cards
Optional digital interface cards (MY8, MY4 series)
Digital Input
(2TR IN DIGITAL 1–3)
SRC
On/off (1:3 and 3:1 maximum input to output sample rate ratio)
Input Channel CH1–56
Input patch
—
Phase
Normal/reverse
Gate-type
3
On/off
Key in: 12 ch Group (1–12, 13–24, 25–36, 37–48, 49–56)/AUX1–8
Comp-type
4
On/off
Key in: self /Stereo Link
Pre EQ/pre fader/post fader
Attenuator
–96.0 to +12.0 dB (0.1 dB step)
EQ
4-band PEQ
5
On/off
Delay
0–43400 samples
On/off
—
Fader
100 mm motorized (INPUT/AUX1–8)
Aux send
On/off
AUX1–8; pre fader/post fader
Solo
On/off
Pre fader/after pan
Pan
127 positions (Left= 1–63, Center, Right= 1–63)
Surround pan
127 × 127 positions
LFE level
–∞, –96 dB to +10 dB (256 step)
Routing
STEREO, BUS1–8, DIRECT OUT
Direct out
Pre EQ/pre fader/post fader
Metering
Displayed on LCD
Peak hold on/off
TALKBACK
Level control
Analog rotary potentiometer
AD converter
24-bit linear, 128-times oversampling
Talkback select
Built-in microphone/AD IN 1–16
On/off
—
OSCILLATOR
Level
0 to –96 dB (1 dB step)
On/off
—
Waveform
Sine 100 Hz, sine 1 kHz, sine 10 kHz, pink noise, burst noise
Routing
BUS1–8, AUX1–8, STEREO L, R
STEREO OUT DA converter
24-bit linear, 128-times oversampling
OMNI OUT 1–8
Output patch
SURROUND MONITOR, STEREO, BUS1–8, AUX1–8, DIRECT OUT
1–56, INSERT OUT (CH1–56, BUS1–8, AUX1–8, STEREO)
DA converter
24-bit linear, 128-times oversampling
CONTROL ROOM MONITOR
OUT
Monitor select
STEREO, 2TR IN DIGITAL 1, 2TR IN DIGITAL 2, 2TR IN DIGITAL 3, 2TR
I N ANALOG 1, 2TR IN ANALOG 2, ASSIGN 1, 2 (BUS 1–8/AUX 1–8)
Mono
On/off
Dimmer
On/off
DA converter
24-bit linear, 128-times oversampling
Level control
Analog rotary potentiometer
Phones level
Analog rotary potentiometer
STUDIO MONITOR OUT
Monitor select
CONTROL ROOM, STEREO, AUX 7, AUX 8, TALKBACK
DA converter
24-bit linear, 128-times oversampling
Level control
Analog rotary potentiometer
