Filter
Top Products
Effects Parameters 243
02R96—Owner’s Manual
DIST->DELAY
One input, two output distortion and delay effects in series.
MULTI FILTER
Two input, two output 3-band multi-filter (24 dB/octave).
Parameter Range Description
DST TYPE
DST1, DST2, OVD1,
OVD2, CRUNCH
Distortion type (DST = distortion, OVD = overdrive)
DRIVE
0–100 Distortion drive
MASTER
0–100 Master volume
TONE
–10 to +10 Tone control
N. GATE
0–20 Noise reduction
DELAY
0.0–2725.0 ms Delay time
FB. GAIN
–99 to +99%
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
HI. RATIO
0.1–1.0 High-frequency feedback ratio
FREQ.
0.05–40.00 Hz Modulation speed
DEPTH
0–100% Modulation depth
DLY BAL
0–100%
Distortion and delay balance (0% = all distortion, 100% = all
delayed distortion)
SYNC
OFF/ON Tempo parameter sync on/off
DLY NOTE
1
1. (Maximum value depends on
the tempo setting)
Used in conjunction with TEMPO to determine DELAY
MOD NOTE
2
2.
Used in conjunction with TEMPO to determine FREQ.
Parameter Range Description
TYPE 1
HPF, LPF, BPF Filter 1 type: high pass, low pass, band pass
TYPE 2
HPF, LPF, BPF Filter 2 type: high pass, low pass, band pass
TYPE 3
HPF, LPF, BPF Filter 3 type: high pass, low pass, band pass
FREQ. 1
28 Hz–16.0 kHz Filter 1 frequency
FREQ. 2
28 Hz–16.0 kHz Filter 2 frequency
FREQ. 3
28 Hz–16.0 kHz Filter 3 frequency
LEVEL 1
0–100 Filter 1 level
LEVEL 2
0–100 Filter 2 level
LEVEL 3
0–100 Filter 3 level
RESO. 1
0–20 Filter 1 resonance
RESO. 2
0–20 Filter 2 resonance
RESO. 3
0–20 Filter 3 resonance