Effects Parameters 225
02R96—Owner’s Manual
STEREO DELAY
Two input, two output basic stereo delay.
MOD. DELAY
One input, two output basic repeat delay with modulation.
Parameter Range Description
DELAY L
0.0–1350.0 ms Left channel delay time
DELAY R
0.0–1350.0 ms Right channel delay time
FB. G L
–99 to +99%
Left channel feedback (plus values for normal-phase feed-
back, minus values for reverse-phase feedback)
FB. G R
–99 to +99%
Right channel feedback (plus values for normal-phase feed-
back, minus values for reverse-phase feedback)
HI. RATIO
0.1–1.0 High-frequency feedback ratio
HPF
THRU, 21.2 Hz–8.00
kHz
High-pass filter cutoff frequency
LPF
50.0 Hz–16.0 kHz,
THRU
Low-pass filter cutoff frequency
SYNC
OFF/ON Tempo parameter sync on/off
NOTE L
1
1. (Maximum value depends on the
tempo setting)
Used in conjunction with TEMPO to determine left channel
DELAY
NOTE R
1
Used in conjunction with TEMPO to determine right chan-
nel DELAY
Parameter Range Description
DELAY
0.0–2725.0 ms Delay time
FB. GAIN
–99 to +99%
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
HI. RATIO
0.1–1.0 High-frequency feedback ratio
FREQ.
0.05–40.00 Hz Modulation speed
DEPTH
0–100% Modulation depth
WAVE
Sine/Tri Modulation waveform
HPF
THRU, 21.2 Hz–8.00
kHz
High-pass filter cutoff frequency
LPF
50.0 Hz–16.0 kHz,
THRU
Low-pass filter cutoff frequency
SYNC
OFF/ON Tempo parameter sync on/off
DLY NOTE
1
1. (Maximum value depends on
the tempo setting)
Used in conjunction with TEMPO to determine DELAY
MOD NOTE
2
2.
Used in conjunction with TEMPO to determine FREQ
