Filter
Top Products
MIDI Channel Setup 165
02R96—Owner’s Manual
MIDI Channel Setup
MIDI Channels for reception and transmission are specified as follows.
1 Use the DISPLAY ACCESS [MIDI] button to locate the MIDI Setup page.
2 Use the cursor buttons or Parameter wheel to select the parameters, and use
the INC/DEC buttons or [ENTER] button to set them.
RECEIVE: The Channel buttons are used to select a MIDI Channel for MIDI message
reception. The Enable buttons are used to turn on and off reception of Program Change,
Parameter Change, and Control Change messages.
TRANSMIT: The Channel buttons are used to select a MIDI Channel for MIDI message
transmission. The Enable buttons are used to turn on and off transmission of Program
Change, Parameter Change, and Control Change messages.
OMNI: These buttons determine whether the 02R96 responds to Program Change and
Control Change messages only on the specified MIDI Receive Channel or on all Channels.
ECHO: These buttons determine whether Program Change, Parameter Change, Control
Change, and Other Commands received at the MIDI IN port are echoed through to the
MIDI OUT port.