Filter
Top Products
Effects Parameters 227
02R96—Owner’s Manual
ECHO
Two input, two output stereo delay with crossed feedback loop.
CHORUS
Two input, two output chorus effect.
Parameter Range Description
DELAY L
0.0–1350.0 ms Left channel delay time
DELAY R
0.0–1350.0 ms Right channel delay time
FB. D L
0.0–1350.0 ms Left channel feedback delay time
FB. D R
0.0–1350.0 ms Right channel feedback delay time
FB. G L
–99 to +99%
Left channel feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
FB. G R
–99 to +99%
Right channel feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
L->R FB. G
–99 to +99%
Left to right channel feedback gain (plus values for nor-
mal-phase feedback, minus values for reverse-phase feed-
back)
R->L FB. G
–99 to +99%
Right to left channel feedback gain (plus values for nor-
mal-phase feedback, minus values for reverse-phase feed-
back)
HI. RATIO
0.1–1.0 High-frequency feedback ratio
HPF
THRU, 21.2 Hz–8.00
kHz
High-pass filter cutoff frequency
LPF
50.0 Hz–16.0 kHz,
THRU
Low-pass filter cutoff frequency
SYNC
OFF/ON Tempo parameter sync on/off
NOTE L
1
1. (Maximum value depends on the
tempo setting)
Used in conjunction with TEMPO to determine DELAY L
NOTE R
1
Used in conjunction with TEMPO to determine DELAY R
NOTE FBL
1
Used in conjunction with TEMPO to determine FB. D L
NOTE FBR
1
Used in conjunction with TEMPO to determine FB. D R
Parameter Range Description
FREQ.
0.05–40.00 Hz Modulation speed
AM DEPTH
0–100% Amplitude modulation depth
PM DEPTH
0–100% Pitch modulation depth
MOD. DLY
0.0–500.0 ms Modulation delay time
WAVE
Sine, Tri Modulation waveform
LSH F
21.2 Hz–8.00 kHz Low shelving filter frequency
LSH G
–12 to +12 dB Low shelving filter gain
EQ F
100 Hz–8.00 kHz EQ (peaking type) frequency
EQ G
–12 to +12 dB EQ (peaking type) gain
EQ Q
10.0–0.10 EQ (peaking type) bandwidth
HSH F
50.0 Hz–16.0 kHz High shelving filter frequency
HSH G
–12 to +12 dB High shelving filter gain
SYNC
OFF/ON Tempo parameter sync on/off
NOTE
1
1.
Used in conjunction with TEMPO to determine FREQ.