Filter
Top Products
250 Appendix A: Parameter Lists
02R96—Owner’s Manual
COMPAND 5.1
Six input, six output compander for 5.1 surround, with individual solo for each band, and
gain reduction metering of left and right (L+R), left surround and right surround (LS+RS),
center (C), or LFE channels.
Parameter Range Description
LOW GAIN
–96.0 to +12.0 dB Low band level
MID GAIN
–96.0 to +12.0 dB Mid band level
HI. GAIN
–96.0 to +12.0 dB High band level
PRESENCE
–10 to +10
For positive values, the threshold of the high band is low-
ered and the threshold of the low band is increased. For
negative values, the opposite will occur. When set to 0, all
three bands are affected the same.
THRE
–24.0 dB to 0.0 dB Compressor threshold
RATIO
1:1 to 20:1 Compressor ratio
ATTACK
0–120 ms Compressor attack
WIDTH
1–90 dB Width before the expander operates
TYPE
Soft, Hard Compander type
LOOKUP
0.0–100.0 ms Lookup delay
CEILING
–6.0 dB to 0.0 dB, OFF Specifies the maximum output level
L–M XOVR
21.2 Hz–8.00 kHz Low/mid crossover frequency
M–H XOVR
21.2 Hz–8.00 kHz Mid/high crossover frequency
SLOPE
–6 dB to –12 dB Filter slope
KEY LINK
1
1. 5.1: key-in of all inputs are linked. 5.0: key-in of the L, C, R, LS, and RS are linked (LFE is indepen-
dent). 3+2: key-in of L, C, and R are linked, and LS and RS are linked. 2+2: key-in of L and R are
linked, and LS and RS are linked.
Key-in linking