Filter
Top Products
Effects Parameters 231
02R96—Owner’s Manual
DUAL PITCH
Two input, two output pitch shifter.
ROTARY
One input, two output rotary speaker simulator.
Parameter Range Description
PITCH 1
–24 to +24 semitones Channel #1 pitch shift
FINE 1
–50 to +50 cents Channel #1 pitch shift fine
LEVEL 1
–100 to +100%
Channel #1 level (plus values for normal phase, minus values
for reverse phase)
PAN 1
L63 to R63 Channel #1 pan
DELAY 1
0.0–1000.0 ms Channel #1 delay time
FB. G 1
–99 to +99%
Channel #1 feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
PITCH 2
–24 to +24 semitones Channel #2 pitch shift
FINE 2
–50 to +50 cents Channel #2 pitch shift fine
LEVEL 2
–100 to +100%
Channel #2 level (plus values for normal phase, minus values
for reverse phase)
PAN 2
L63 to R63 Channel #2 pan
DELAY 2
0.0–1000.0 ms Channel #2 delay time
FB. G 2
–99 to +99%
Channel #2 feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
MODE
1–10 Pitch shift precision
SYNC
OFF/ON Tempo parameter sync on/off
NOTE 1
1
1. (Maximum value depends on the
tempo setting)
Used in conjunction with TEMPO to determine Channel #1
delay
NOTE 2
1
Used in conjunction with TEMPO to determine Channel #2
delay
Parameter Range Description
ROTATE
STOP, START Rotation stop, start
SPEED
SLOW, FAST Rotation speed (see SLOW and FAST parameters)
SLOW
0.05–10.00 Hz SLOW rotation speed
FAST
0.05–10.00 Hz FAST rotation speed
DRIVE
0–100 Overdrive level
ACCEL
0–10 Acceleration at speed changes
LOW
0–100 Low-frequency filter
HIGH
0–100 High-frequency filter