Filter
Top Products
234 Appendix A: Parameter Lists
02R96—Owner’s Manual
DYNA. FLANGE
Two input, two output dynamically controlled flanger.
DYNA. PHASER
Two input, two output dynamically controlled phaser.
Parameter Range Description
SOURCE
INPUT, MIDI Control source: input signal or MIDI Note On velocity
SENSE
0–100 Sensitivity
DIR.
UP, DOWN Upward or downward frequency change
DECAY
1
1. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz), 3 ms–23.0 s (fs=88.2 kHz), 3 ms–21.1 s
(fs=96 kHz)
Decay speed
OFFSET
0–100 Delay time offset
FB GAIN
–99 to +99%
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
LSH F
21.2 Hz–8.00 kHz Low shelving filter frequency
LSH G
–12 to +12 dB Low shelving filter gain
EQ F
100 Hz–8.00 kHz EQ (peaking type) frequency
EQ G
–12 to +12 dB EQ (peaking type) gain
EQ Q
10.0–0.10 EQ (peaking type) bandwidth
HSH F
50.0 Hz–16.0 kHz High shelving filter frequency
HSH G
–12 to +12 dB High shelving filter gain
Parameter Range Description
SOURCE
INPUT, MIDI Control source: input signal or MIDI Note On velocity
SENSE
0–100 Sensitivity
DIR.
UP, DOWN Upward or downward frequency change
DECAY
1
1. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz), 3 ms–23.0 s (fs=88.2 kHz), 3 ms–21.1 s
(fs=96 kHz)
Decay speed
OFFSET
0–100 Lowest phase-shifted frequency offset
FB GAIN
–99 to +99%
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
STAGE
2, 4, 8, 10, 12, 14, 16 Number of phase shift stages
LSH F
21.2 Hz–8.00 kHz Low shelving filter frequency
LSH G
–12 to +12 dB Low shelving filter gain
HSH F
50.0 Hz–16.0 kHz High shelving filter frequency
HSH G
–12 to +12 dB High shelving filter gain