Filter
Top Products
80 Chapter 10—Aux Sends
02R96—Owner’s Manual
Setting Aux Send Levels
Aux Send levels can be set by using the faders or Encoders.
Using the Faders
1 Use the LAYER buttons to select the Layers.
2 Press the FADER MODE [AUX] button to select the Aux Fader mode.
3 Use the AUX SELECT [1–8] buttons to select Aux Sends 1–8.
4 Use the faders to set the Aux Send levels.
Refer to the legend on the left side of the faders when setting Aux Send levels.
Using the Encoders
1 Use the LAYER buttons to select the Layers.
2 Press the ENCODER MODE [AUX] button to select the Aux Encoder mode.
3 Use the AUX SELECT [1–8] buttons to select Aux Sends 1–8.
4 Use the Encoders to set the Aux Send levels.
Aux Send Pages
You can view and set the Aux Send parameters of all Input Channels on the Aux Send pages.
Operation of the Aux Send pages in Variable and Fixed mode is explained separately.
Variable Mode
See page 79 for information on how to select Variable Aux mode.
1 Use the AUX SELECT [DISPLAY] button to select the Aux Send pages.
The Aux Send parameters for the 56 Input Channels are divided among three pages. The
Input Channel 1–24 Aux Send page in Variable mode is shown below. The layout of the
other two pages is the same.
2 Use the AUX SELECT [1–8] buttons to select Aux Sends 1–8.
3 Use the cursor buttons to select the Input Channel Aux Send controls.
Input Channels can also be selected by using the LAYER buttons and [SEL] buttons.
25
49
1
50
40
30
20
15
10
10
5
0
5