Filter
Top Products
82 Chapter 10—Aux Sends
02R96—Owner’s Manual
Viewing Aux Send Settings
You can view and set settings of all Aux Sends on the Aux View pages. Level and Pre/Post
parameters are displayed separately.
Level Parameters
In Level mode, the Aux View pages display Aux Send Level and On/Off parameters. Fixed
mode Aux Sends can be turned on and off only.
1 Use the AUX SELECT [DISPLAY] button to select the Aux View pages.
2 Select the DISPLAY LEVEL button, and press [ENTER].
The Aux View parameters for the 56 Input Channels are divided among three pages. The
Input Channel 1–24 Aux View page is shown below in Level mode. The layout of the other
two pages is the same.
3 Use the cursor buttons to select the Input Channel Aux Sends.
Input Channels can also be selected by using the Input Channel Layer buttons and [SEL]
buttons. Aux Sends can also be selected by using the AUX SELECT [1–8] buttons.
4 Use the Parameter wheel or INC/DEC buttons to set the Aux Send levels.
5 Use the [ENTER] button to turn on and off the selected Aux Send.
The various Aux View page indicators are as follows:
Send level set to –∞, or Fixed mode Aux Send set to off.
Send level bar.
Send set to off.
Send level set to nominal.
Send off, level set to nominal.
Fixed mode Aux Send set to on.
In Variable Aux mode, the Level and On/Off parameter values for the selected Aux Send are
displayed in the lower-right corner of the page, for example, “LEVEL: –2.0 dB ON/OFF:
ON.”
In Fixed Aux mode, the On/Off parameter values for the selected Aux Send are displayed in
the lower-right corner of the page, for example, “LEVEL: FIXED ON/OFF: ON.”