Filter
Top Products
288 Appendix D: Options
02R96—Owner’s Manual
Appendix D: Options
MB02R96 Peak Meter Bridge
Installation
1 Unscrew the four fixing screws 1 on the 02R96 rear panel to which the
meter bridge will be attached.
2 Using the four supplied 8 mm screws B, attach the brackets to the meter
bridge, as shown below.
3 Align the meter bridge with the 02R96, and, using two of the supplied
12 mm screws
C, screw in the top two fixing screws, but don’t tighten them
fully.
4 Screw in the bottom two screws C and tighten them fully.
5 Fully tighten the top two screws C.
6 Connect the meter bridge cable to the 02R96’s METER port.
1 1
2
2
3
3