224 Appendix A: Parameter Lists
02R96—Owner’s Manual
GATE REVERB, REVERSE GATE
One input, two output early reflections with gate, and early reflections with reverse gate.
MONO DELAY
One input, one output basic repeat delay.
Parameter Range Description
TYPE
Type-A, Type-B Type of early reflection simulation
ROOMSIZE
0.1–20.0 Reflection spacing
LIVENESS
0–10 Early reflections decay characteristics (0 = dead, 10 = live)
INI. DLY
0.0–500.0 ms Initial delay before reverb begins
DIFF.
0–10 Reflection diffusion (left–right reflection spread)
DENSITY
0–100% Reflection density
HI. RATIO
0.1–1.0 High-frequency feedback ratio
ER NUM.
1–19 Number of early reflections
FB GAIN
–100 to +100% Feedback gain
HPF
THRU, 21.2 Hz–8.00
kHz
High-pass filter cutoff frequency
LPF
50.0 Hz–16.0 kHz,
THRU
Low-pass filter cutoff frequency
Parameter Range Description
DELAY
0.0–2730.0 ms Delay time
FB. GAIN
–99 to +99%
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
HI. RATIO
0.1–1.0 High-frequency feedback ratio
HPF
THRU, 21.2 Hz–8.00
kHz
High-pass filter cutoff frequency
LPF
50.0 Hz–16.0 kHz,
THRU
Low-pass filter cutoff frequency
SYNC
OFF/ON Tempo parameter sync on/off
NOTE
1
1. (Max. value depends on tempo
setting)
Used in conjunction with TEMPO to determine DELAY
