Filter
Top Products
Selecting Fader Modes 35
02R96—Owner’s Manual
Selecting Fader Modes
The exact function of each fader depends on the selected Layer and Fader mode.
1 Select a Layer, as explained on page 33.
2 Use the FADER MODE buttons to select a Fader mode.
[FADER]: Channel faders control Input Channel levels or Output Channel master levels,
depending on the selected Layer.
[AUX]: Channel faders control Aux Send levels, depending on the selected Layer.
The indicator of the currently selected FADER MODE button lights up.
The following table shows the channel fader functions for each Layer and Fader mode.
Layer
Fader
Mode
Fader
1–8 9–16 17–24
1-24
Fader
Input Channels 1–24 level
Aux
Input Channels 1–24 Aux Send level
25–48
Fader
Input Channels 25–48 level
Aux
Input Channels 25–48 Aux Send level
Master
Fader
Input Channels 49–56
level
Aux Sends 1–8 master
level
Bus Outs 1–8 master
level
Aux
Input Channels 49–56
Aux Send level
No operation: faders fixed at –∞
Remote
Fader
Operation depends on the selected target. See “About the Remote Layer”
on page 189 for more information.
Aux
AUXFADER
FADER MODE