Filter
Top Products
Recalling Scenes Safely 143
02R96—Owner’s Manual
Recalling Scenes Safely
When a Scene is recalled, all mix parameters are set accordingly. In some situations, you
may want to retain the settings of certain parameters on certain channels, and this can be
achieved by using the Recall Safe function. Recall Safe can be set individually for Input
Channels, Bus Outs, Aux Sends, and the Stereo Out.
1 Use the SCENE MEMORY [DISPLAY] button to locate the Recall Safe page.
2 Select the SAFE ENABLED/DISABLED button, and use the [ENTER] button or
the INC/DEC buttons to enable or disable the Recall Safe function.
3 Use the cursor buttons, [SEL] buttons, or Parameter wheel to select channels,
and use the [ENTER] button or the INC/DEC buttons to set them as Safe chan-
nels.
When a channel is selected by using the [SEL] buttons, its Long name appears in the
upper-right corner of the display. When a channel is Safe, its number appears highlighted.
4 Use the cursor buttons or Parameter wheel to select the MODE parameters,
and the [ENTER] button to set them.
The MODE buttons determine which Safe channel parameters are unaffected by Scene
recalls. ALL (all parameters. This option is mutually exclusive with the following options),
FADER (faders), ON (On/Off parameters), PAN (Pan parameters), EQ (EQ parameters),
COMP (Comp parameters), GATE (Gate parameters), AUX (Aux Send levels), AUX ON
(Aux Send On/Off parameters).
The EFFECT button operates independently of the MODE buttons and can be used to
make the effects Safe.
Recall safe settings are stored in Scenes memories.