Filter
Top Products
248 Appendix A: Parameter Lists
02R96—Owner’s Manual
M. BAND DYNA.
Two input, two output 3-band dynamics processor, with individual solo and gain reduction
metering for each band.
Parameter Range Description
LOW GAIN
–96.0 to +12.0 dB Low band level
MID GAIN
–96.0 to +12.0 dB Mid band level
HI. GAIN
–96.0 to +12.0 dB High band level
PRESENCE
–10 to +10
For positive values, the threshold of the high band is low-
ered and the threshold of the low band is increased. For
negative values, the opposite will occur. When set to 0, all
three bands are affected the same.
EXP. THRE
–54.0 dB to –24.0 dB Expander threshold
EXP. RAT
1:1 to ∞:1 Expander ratio
EXP. REL
1
1. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz), 3 ms–23.0 s (fs=88.2 kHz), 3 ms–21.1 s
(fs=96 kHz)
Expander release time
EXP. BYP
ON/OFF Expander bypass
CMP. THRE
–24.0 dB to 0.0 dB Compressor threshold
CMP. RAT
1:1 to 20:1 Compressor ratio
CMP. REL
1
Compressor release time
CMP. ATK
0–120 ms Compressor attack
CMP. KNEE
0–5 Compressor knee
CMP. BYP
ON/OFF Compressor bypass
LIM. THRE
–12.0 dB to 0.0 dB Limiter threshold
LIM. REL
1
Limiter release time
LIM. ATK
0–120 ms Limiter attack
LIM. KNEE
0–5 Limiter knee
LIM. BYP
ON/OFF Limiter bypass
LOOKUP
0.0–100.0 ms Lookup delay
L–M XOVR
21.2 Hz–8.00 kHz Low/mid crossover frequency
M–H XOVR
21.2 Hz–8.00 kHz Mid/high crossover frequency
SLOPE
–6 dB to –12 dB Filter slope
CEILING
–6.0 dB to 0.0 dB, OFF Specifies the maximum output level