Filter
Top Products
Control Surface 21
02R96—Owner’s Manual
CONTROL ROOM
A STEREO 2TR D1 button
This button selects the 2TR IN DIGITAL AES/EBU 1 as the Control Room
Monitor signal source. Its indicator lights up when this source is selected. See
“Control Room Monitoring” on page 114 for more information.
B STEREO 2TR D2 button
This button selects the
2TR IN DIGITAL COAXIAL 2 as the Control Room
Monitor signal source. Its indicator lights up when this source is selected. See
“Control Room Monitoring” on page 114 for more information.
C STEREO 2TR D3 button
This button selects the
2TR IN DIGITAL COAXIAL 3 as the Control Room
Monitor signal source. Its indicator lights up when this source is selected. See
“Control Room Monitoring” on page 114 for more information.
D STEREO 2TR A1 button
This button selects the
2TR IN ANALOG 1 as the Control Room Monitor signal
source. Its indicator lights up when this source is selected. See “Control Room
Monitoring” on page 114 for more information.
E STEREO 2TR A2 button
This button selects the
2TR IN ANALOG 2 as the Control Room Monitor signal source. Its
indicator lights up when this source is selected. See “Control Room Monitoring” on page
114 for more information.
F STEREO button
This button selects the Stereo Out as the Control Room Monitor signal source. Its indicator
lights up when this source is selected. See “Control Room Monitoring” on page 114 for
more information.
G STEREO ASSIGN 1 button
This button is used to select the assigned Output Channel as the Control Room Monitor
signal source. Its indicator lights up when this source is selected. See “Control Room Setup”
on page 115 for more information.
H STEREO ASSIGN 2 button
This button is used to select the assigned Output Channel as the Control Room Monitor
signal source. Its indicator lights up when this source is selected. See “Control Room Setup”
on page 115 for more information.
I SURROUND BUS button
This button is used to select the Bus Outs as the Surround Monitor signal source. Its indi-
cator lights up when this source is selected. See “Surround Monitoring” on page 116 for
more information.
J SURROUND SLOT button
This button is used to select the assigned Slot’s Inputs as the Surround Monitor signal
source. Its indicator lights up when this source is selected. See “Surround Monitoring” on
page 116 for more information.
K SURROUND MONITOR LEVEL control
This control is used to adjust the level of the Surround Monitor signals. See “Surround
Monitoring” on page 116 for more information.
L CONTROL ROOM LEVEL control
This control is used to adjust the level of the Control Room Monitor signal. See “Control
Room Monitoring” on page 114 for more information.
BUS
SLOT
CONTROL ROOM
2TR D1 2TR A1
2TR D2 2TR A2
2TR D3 STEREO
ASSIGN
1 ASSIGN2
SURROUND
DIMMER
CONTROL ROOM LEVEL
100
100
TALKBACK
SURROUND MONITOR LEVEL
1 4
2 5
3 6
7
9
8
K
L
M
N
J