Filter
Top Products
Effects Parameters 233
02R96—Owner’s Manual
AMP SIMULATE
One input, two output guitar amp simulator.
DYNA. FILTER
Two input, two output dynamically controlled filter.
Parameter Range Description
AMP TYPE
1
1. STK-M1, STK-M2, THRASH, MIDBST, CMB-PG, CMB-VR, CMB-DX, CMB-TW, MINI, FLAT
Guitar amp simulation type
DST TYPE
DST1, DST2, OVD1,
OVD2, CRUNCH
Distortion type (DST = distortion, OVD = overdrive)
DRIVE
0–100 Distortion drive
MASTER
0–100 Master volume
BASS
0–100 Bass tone control
MIDDLE
0–100 Middle tone control
TREBLE
0–100 High tone control
CAB DEP
0–100% Speaker cabinet simulation depth
EQ F
99–8.0 kHz Parametric equalizer frequency
EQ G
–12 to +12 dB Parametric equalizer gain
EQ Q
10.0–0.10 Parametric equalizer bandwidth
N. GATE
0–20 Noise reduction
Parameter Range Description
SOURCE
INPUT, MIDI Control source: input signal or MIDI Note On velocity
SENSE
0–100 Sensitivity
DIR.
UP, DOWN Upward or downward frequency change
DECAY
1
1. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz), 3 ms–23.0 s (fs=88.2 kHz), 3 ms–21.1 s
(fs=96 kHz)
Filter frequency change decay speed
TYPE
LPF, HPF, BPF Filter type
OFFSET
0–100 Filter frequency offset
RESO.
0–20 Filter resonance
LEVEL
0–100 Output Level