Filter
Top Products
Selecting Display Pages 31
02R96—Owner’s Manual
Selecting Display Pages
Display pages are grouped by function, and each group of pages can be selected by
using the following [DISPLAY] buttons: AUX SELECT, ENCODER MODE,
EFFECTS/PLUG-INS, ROUTING, DYNAMICS, PAN/SURROUND, EQUAL-
IZER, SCENE MEMORY, USER DEFINED KEYS, MACHINE CONTROL, MON-
ITOR. Further page groups can be selected by using the DISPLAY ACCESS buttons.
• The next page in the group can be selected by pressing the [DISPLAY] button.
• Previous pages can be selected by pressing and holding down the [DISPLAY] button.
• The first page in the group can be selected by double-clicking the [DISPLAY] button.
• Pages whose tabs are currently displayed can be
selected by using the F1–F4 buttons.
If there are more pages available than the four whose
tabs are currently displayed, depending on whether they
are located to the left or right, either the left or right Tab
Scroll arrow appears. Pressing either the Left or Right
Tab Scroll button displays the tabs of these pages, which
can then be selected by using the F1–F4 buttons.
When parameters are divided among several pages, for example, the Input Channel Atten-
uators, which are divided among three pages, the page containing the parameter for the cur-
rently selected channel is selected automatically when channels on different Layers are
selected. For example, if the Input Channel 1–24 Attenuator page is currently selected, and
then you select, say, Input Channel #25 by using the LAYER [25–48] button and [SEL] but-
ton #1, the Input Channel 25–48 Attenuator page is selected automatically.
The currently selected page in a group, and the parameter selected on that page, are remem-
bered when you select another group of pages, so when you return to that group, by press-
ing its [DISPLAY] button, that page is displayed with the same parameter selected.
The Auto Display preferences can be set so that certain pages appear automatically when a
corresponding control is adjusted. For example, if the “Auto EQUALIZER Display” prefer-
ence is on, the EQ page appears automatically when a SELECTED CHANNEL EQUAL-
IZER control is operated. See page 197 for information on the Auto Display preferences.
Display Parameter Boxes
Operation of the various buttons, rotary controls, and faders that
appear on the display pages is straightforward. The only items that
require a special mention are the parameter boxes, such as the
INSERT POSITION, OUT, and IN parameter boxes shown here.
Operation of these boxes consists of two steps. First you select a value,
typically by using the Parameter wheel or INC/DEC buttons. Second
you confirm your selection, while the value is flashing, by pressing the
[ENTER] button. If you select another parameter while the value is
still flashing, it remains unchanged.
Parameter Windows
When a rotary control in the SELECTED CHANNEL section is operated, if the
corresponding parameter does not appear on the currently selected page, a
parameter window like the one shown here is displayed while the control is
adjusted. If the control is not adjusted for awhile, the window closes automat-
ically. If the Auto Display preference for the adjusted parameter is on, the page containing
that parameter appears instead of this parameter window.
DISPLAY
F1 F2 F3
F4
Tab Scroll arrows
Tab scroll buttons