Filter
Top Products
Configuration directory
Saving (& naming) setup file (config. file)
118
Models SE and DL
• Add a character by pressing the right arrow key.
• Delete a character by pressing the left arrow key.
• Repeat this step as necessary.
5. When finished, press and Save will appear.
6. Press to save the file name (or press On/Off/Esc to cancel).
Configuration directory
File Setups, or File Configurations, can be saved to the instrument in order to
save and reuse for future. (This can also be performed via QSP-II when you
save a setup.)
The naming/renaming procedure below includes a lookup utility that you
can use to determine what name to assign.
Saving (& naming) setup file (config. file)
When saving a setup, you first select the settings and then save via the Save
Config File (accessed from the File softkey in the start menu.) Once a
configuration is saved, you can view or delete it via the Config. Directory.
Naming and Saving set-up
1. Ensure the SoundPro is in Stop mode and the parameters are selected.
(See Chapter 3 and Chapter 4 for details.)
2. In the Start screen, press the File softkey and select Save Config. File.
3. In the Setup File screen, press to move to the name/rename file field.
Figure 7-10: Saving/Creating setup file (config. file)
Name/Rename file
Save
Press on/off/esc to
move to this field
Press a softkey to quickly select
a character set. Then, press
up/down arrows.
Selected character (indicated by the
underline). Press up/down to change
character. Press Left arrow to move to
add another character. Press Right to
delete or change a character.