Filter
Top Products
Configuration directory
Viewing, loading, deleting setup files (config.)
119
Models SE and DL
4. To change the file name follow below:
• Press to change the selected character (denoted by the
underline).
• Optional Shortcut: press a softkey (has a character range) and then
press to quickly move to the appropriate value.
• Press Left arrow to delete a character (or move backwards).
• Press Right arrow to add a character.
• Repeat as necessary.
5. To save your setup, press the On/Off/Esc and the Save option will be
highlighted. Press Enter key to save (or press On/Off/Esc key to cancel).
Viewing, loading, deleting setup files (config.)
Viewing, loading, deleting setup files
1. Open the Configuration Directory screen (follow steps 1-2 above ,
“Saving setup file”).
2. The Setup File screen will appear. Depending on what setups you
saved, these will appear in this screen.
3. To Load or Delete a file configuration, do the following:
• Select a file you wish to load/delete (by pressing up/down arrow until
selected.)
• Once selected, press either the Load softkey (to load and apply the
saved setup) or press Delete (to delete a setup).
• Press On/Off/Esc to repeatedly to return to the Start screen.
Figure 7-11: Viewing, loading, deleting setup files
Load softkey
Once selected, it will
apply the saved
setup.
Delete softkey
Select a set-up
then press
Delete softkey