Filter
Top Products
13 Microphone and accessories
Class/Type 1 and Class/Type 2 instrument
Models SE and DL
Class/Type 1 and Class/Type 2 instrument
The SoundPro is shipped with the Type 1 in a protective case with a serial number
labeled on the side of the microphone. Similarly, the SoundPro with the Class/Type 2
microphone is also shipped in a protective case. To attach and remove the
microphone, please follow one of the types below:
• BK4936 microphone - Remove the microphone from its case and thread it on the
SoundPro SE/DL preamp in accordance with the instructions provided in the
microphone case. Note that the BK4936 microphone is provided with a Random
Incidence Corrector (RIC). Use the same microphone instructions for information
about using and installing that device.
• All other Class/Type 1 microphones - Remove the microphone from its
protective case and thread it on the preamp. Before using, be sure to remove the
plastic cap and save it in the case for future use.
• Class/Type 2 microphones – Remove the
microphone from its protective case and thread it on
the preamp. Before using, be sure to remove plastic
cap and save it in the case for future use.
NOTE: to properly remove the microphone, please
adhere to the caution sticker located on the backside of
the instrument and the drawing to the right.
Windscreen
Use a windscreen that fits the tip of the microphone to reduce sound disturbances
caused by physical contact and wind turbulence. 3M provides the WS-7
windscreen that fits a ½-inch microphone with every instrument kit. If you didn’t
order a ½-inch microphone, or if you have one of different size, you may wish to
order a windscreen for the other size.
Figure 2-3: SoundPro with microphone and windscreen
Yes
No